what is the maximum prmissible error on a weighing scale
zerro error in a spring balance affects the accuracy in the weight. To find zero error in spring balance, you have to first find the least count of the spring balance and then suspend it freely, if the outcome is +1, the zero error is +1 and if it is -1 ,the zero error is -1.
The smallest scale division of a triple beam balance is .1 grams. This means that its measuring error is .01 grams.
There are two screws on the physical balance. One is on the left side and other is on the right side of the physical balance. If pointer is not in middle of the scale, we move these screws forwards or backwards to bring the pointer in the middle of the scale. This is done before we put any mass or weight in either of the pan. In other words we use the screws to remove the zero error of the physical balance.
zero error apparatus error experimental condition experiment error parallax error
Zero error and parallax error
To get the relative error is the maximum error over the measurement. So the maximum error is the absolute error divided by 2. So the maximum error is 0.45. The relative error is 0.45 over 45 cm.
zerro error in a spring balance affects the accuracy in the weight. To find zero error in spring balance, you have to first find the least count of the spring balance and then suspend it freely, if the outcome is +1, the zero error is +1 and if it is -1 ,the zero error is -1.
This error depends on the type of your balance; read the error of the balance on the scale, label or user manual.
Type your answer here omission error commission error principles error compensatory error
Calibration equipment is equipment used to test the accuracy of other equipment, and make sure it is as accurate as it needs to be. If used on a set of bathroom scales, it might involve a set of weights that are known to weigh 20Kg, 30Kg, 40Kg, and so on. (These weights might be as much as 0.2Kg under or over weight, for example.) These would then be put on the scales, to make sure the scales gave a reading that was 20Kg, 30Kg 40Kg. For bath room-scales the 20Kg weight might produce a reading from 19 to 21Kg, which is plus or minus 5%, IE an error of 5%, with the "calibration weights" 1.25% accurate. For bathroom scales this would be "OK" Depending on what is being calibrated there would be a degree of error that would be allowed. For scales in a hospital measuring drugs a 5% error (perfectly OK on the scales in your bathroom) could result in a fatal overdose.
error
They allowed too many German minor states into the Confederation. They became much stronger than was disireable and shifted the balance of power.
Post Trial Balance Adjustment means that after prepared of trial balance if any error be locate and trial balance be not tally then suspense a/c be made and through error can be rectifyand after that trial balance is adjust.
do the margin of error on the weighing scales (e.g. 0.05) then divide that by the measurement taken (e.g. 3.5g) then times that by 100 so 0.05/3.5 x 100 = 1.4%
An error in balancing is called an "error of measurement". The type of error that will be introduced if one fails to set the zero point of the balance before making the reading is a systematic error.
while noting the transactions we may commit mistakes unwillingly.or some times may forget some transactions.so we will get an error in the balance sheet.to balance it we will correct the error.
if the effect of an error is cancelled by the effect of some other error,trial balance will agree.