WC9 is cast P22.
it is a high pressure value yes it is a high pressure valve but particularly it is cast P11
Inlet Guide Valves
after the main safety valves are open
Sodium is a solid at room temperature and becomes a liquid at 97.5 degrees Celsius. Sodium cooled valves are exhaust valves in a cylinder head of an engine that open to release exhaust gasses that were formed due to combustion of fuel and air inside the cylinders and typically get very hot. The sodium cooled valves and exhaust valves filled with sodium inside, the sodium helps the valves be cooler than if they were just solid.
Pneumatic valves are used to close valves in high-speed internal combustion engines, pneumatic valves are mostly to help racing engines to get to high speeds.
Arteries are valve-less vessels, meaning there are no valves.
The deposits on the leaflets of valves are called vegetations.
The chordate tendineae prevent the valves from inverting. Meaning that they will only allow the valves to close and then stop. Something like a door stop.
Yes, there are 2 camshafts on a 1.8T GTI. The engine uses a 20 valve design, meaning 5 valves per cylinder. For each cylinder 3 valves are intake valves and 2 valves are exhaust valves. One camshaft drives the intake valves and the other camshaft drives the exhaust valves
Mitral regurgitation or tricuspid regurgitation is the medical term meaning backflow of blood through the mitral or tricuspid valves, respectively.
chordae tendineae
Rotary trumpets, meaning they use rotary valves (like on a French horn) instead of piston valves.
it is a high pressure value yes it is a high pressure valve but particularly it is cast P11
The ideal thickness will have no obstruction in flow, meaning that no friction will be lost.
In valve, port size is formaly called as a trim size which depend on pressure & Flow.
The camshaft ( it actuates the opening and closing of the cylinder head valves) has to be synchronized with the crankshaft (via the timing belt). Otherwise the pistons would hit and bend the valves. The spark plug firing has to be synchronized to the compression of the gas fuel mixture. The fuel injectors have to be synchronized to the opening of the intake valves.
Trumpet valves Motorized pumping valves are two sets of valves.