30 amp breaker
60 amps is twice the amount that you need for a household dryer. What you need is a two pole 30 amp breaker feeding a three conductor #10 cable. A dryer needs a neutral wire, hence the three wire cable for a 240 volt device.
A typical household hair dryer requires around 1.5 to 2.0 kVA (kiloVolt-Amps) to operate. It's important to check the specific power requirements of your hair dryer, as this can vary depending on the model and brand.
To calculate the amperage needed to run a 1000-watt hair dryer, you can use the formula: Amperes = Watts / Volts. Assuming a standard voltage of 120V for household outlets in the US, the amperage needed to run a 1000-watt hair dryer would be approximately 8.33 amps. To convert this to milliamps, you would multiply by 1000, so approximately 8333 milliamps would be needed.
You would need to use a wire size that is rated for at least 40 amps to be safe and to meet the requirements of the air conditioner. A common wire size for this application would be 8 AWG copper wire, which is rated for 40 amps.
If your house has 220vac each leg should have at least 110vac so if you use an electric dryer you would have 110 vac to each leg to run the dryer for outlets and switches it would be the same 110vac volts alternating current to operate electrial devices and to turn the lights on and off.
60 amps is twice the amount that you need for a household dryer. What you need is a two pole 30 amp breaker feeding a three conductor #10 cable. A dryer needs a neutral wire, hence the three wire cable for a 240 volt device.
Minimal 100. Depends on load draw of home. Can be 200 amps or 400 amps as well.
A typical household hair dryer requires around 1.5 to 2.0 kVA (kiloVolt-Amps) to operate. It's important to check the specific power requirements of your hair dryer, as this can vary depending on the model and brand.
The minimum age to run for the Virginia House of Delegates is 21 years of age at the time of election. There are 100 members that are elected lasting for two terms.
To calculate the amperage needed to run a 1000-watt hair dryer, you can use the formula: Amperes = Watts / Volts. Assuming a standard voltage of 120V for household outlets in the US, the amperage needed to run a 1000-watt hair dryer would be approximately 8.33 amps. To convert this to milliamps, you would multiply by 1000, so approximately 8333 milliamps would be needed.
About $10. Do the math. Amps x Volts = Watts. A typical dryer is 30 amps @ 240 volts. That's 7200 Watts. Average electricity cost is $.07 per 1000 watt-hours. So...if you run the dryer for one hour ...it will use 7200 watt-hours. 7.2 x $.07 = $.50 per hour of usage.
Depending on size of Fridge. But AVERAGE is 12 volts for fridge, circuit necessity 15 amps 15 amps X 120 Volts=1800 watts minimum...I'm LEARNING myself
No, you will need a minimum of at least AWG #12 and you may need even bigger depending on the Amps required to run whatever you are using.
Assuming the dryer hose is vented to the outside, the longer the distance the more likelyhood there is of a lint fire. If you are venting the dryer to under the house - don't do it. The warm air mixing with cold air will cause condensation and big expensive problems.
It depends on what sort of dryer, clothes? hair? something industrial?
No, the battery connected to an inverter would not have near enough power to run a dryer.
there wasn't one if you were in the work house and you could walk run and speak you were accepted!