0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is 10BaseT Ethernet NIC?
It is a Network Interface Card that connects 10BaseT Networks together A 10BaseT Cable is an Ethernet Cable consisting of 4 pairs of wires 2 for transmitting and 2 for receiving
What ones are 10baseT cable types?
cat5
The maximum segment lenght on a 10BaseT network is meters?
10BaseT is another name for co-axial cable. It has a maximum cable length of 185 meters or 607 ft.
What are the cables type cannot support full-duplexing?
10BaseT
What is the difference between Cat 2 verses cat 3 cable?
Cat 2 cable was rated at 4 or 16 mbps whereas cat 3 cable would be rated at 10 mbps. Since 10baseT networks with Ethernet ran at 10 mbps this meant that cat 2 cable would not be useable in those networks. The minimum category cable for those networks had to be at least a cat 3 cable.
Which type of cable is most likely in use with RJ45 connectors attached to a computer?
RJ45 connectors are used in "ethernet cables". These cables connect network devices between computers and systems.
What is 10base2?
10BaseT is an Ethernet cabling standard. 10BaseT devices can transfer data at a rate of up to 10 Mbps, and use twisted pairs of wires in their Ethernet cabling, as opposed to a coaxial cable. If you see wiring with an RJ-45 plug on the end, you probably have a 10BaseT or backwards-compatible product (such as 100BaseT or 1000BaseT).
Do 10baseT networks still exist today?
10baseT networks cords do still exist in 2013. They are considered to be a cheaper alternative to create a LAN network. The flaw in the cord however, is that if there is a small malfunction in part of the cable, then the whole thing will not work.
What is the minimum cable type 100base TX specifies?
Type 1A STP or Cat 5 UTP.
What is the max cable length for 10baset network?
100 Meters per segment, a maximum of 5 segments equaling 500 Meters.
What is the minimum bend radius for the diameter of cable?
It depends on the cable. 0 to 5000 volts the minimum bending radius is 6 x diameter of the cable. Above 5000 volts the minimum bending radius is 8 x the diameter of the cable.
What does the T mean in 10Base-T?
It stands for 'twisted pair'. 10BaseT or Ethernet cable consists of two pairs of wires twisted around each other inside an external sheath.
