0
The Minimum is 2 ft. Some places you can put a line in that is only 48 inches under ground. It all depends on what state your in... and the town or city. Up north where it gets cold the put main water lines in that are 8 foot under the ground or better. The reason being is because you gotta put the line below the frost line so it doesn't freeze. The deeper the line is... the better the chances are that you aren't gonna have problems...
What else can I help you with?
How many times the depth of the water is the minimum preferred amount of anchor line to use when anchoring?
3X
How long should your anchor line be?
The length of anchor line is called "Scope" by mariners. The scope of your anchor line should be 5 to 7 times the depth of water that you're anchored in. It should never be less than 3 times the depth. In other words if you usually anchor where the water is 20 feet deep you should have a MINIMUM of 100 feet of line.
What is the minimum depth required for a building foundation?
It depends on your local building codes and the depth of the frost line in your area.
What is the frost line depth in Oshawa Ontario?
Based on construction guidelines for a garage, the minimum depth of a below frost foundation is 3'11". That is the city of Oshawa guidelines.
What line on a sea chart connects points on the same depth?
isobathn. line of map passing through all points of equal depth below water.
What is the depth of main water line to avoid freezing?
The depth of the main water line should be at least 3 to 4 feet below the frost line in your area to avoid freezing. This depth helps to ensure that the water line remains insulated from cold temperatures and prevents it from freezing during winter. It is important to check local building codes and regulations for specific requirements in your region.
What is the recommended depth for burying a 1 inch PEX underground water line?
The recommended depth for burying a 1 inch PEX underground water line is at least 18 inches to protect it from damage and freezing.
How can I locate the main water line into my house?
Locating the main water line into your house can typically be done by finding the water meter, which is usually located near the street or sidewalk in front of your house. The main water line will run from the meter into your house. You can also check for a shutoff valve where the main water line enters your house, as this can indicate the location of the main water line. If you are unsure, you may want to contact a professional plumber for assistance.
How do you convert water psi to water temperature?
Not directly you cant, but sea temperature does decrease with depth, although its not a straight line graph ( though depth : pressure is.)
Where is the main water line located in a house?
The main water line in a house is typically located underground, running from the water meter near the street into the foundation of the house. It is usually found near the water heater or where the water enters the house.
Why do two water level indicators are provided on boiler?
The lower line indicates minimum water needed, the upper line indicates max.
How deep should a main water line be from meter to house in Kentucky?
how deep should water line be from meter to house in Versailles Kentucky
