the mixture is 2 U.S. quarts of fuel oil per 50 lbs of ammonium nitrate. or %93.7 ammonium nitrate, and %6.3 fuel oil. A blasting cap is needed to detonate anfo because it is very stable unlike Acetone Peroxide which is a good booster when using ANFO because it takes a very little amount of Acetone Peroxide to set of ANFO and Acentone Peroxide can be set of with a flame or even as little as shooting it or hitting it with a hammer can set it off because it is so sensitive.
The mixture is referred to as ANFO. The explosive mixture is widely used in the mining and heavy construction industry. A hiogh expllosive detinator is required to get the mixture to release it's potential energy.
ANFO (ammonium nitrate/fuel oil) was created as a mining explosive in the 1950s by combining ammonium nitrate and fuel oil to create a more effective and economical blasting agent compared to dynamite. Its discovery was a result of efforts to improve the safety, cost, and performance of explosives used in the mining industry.
When ammonium nitrate is mixed with diesel fuel, it can create a dangerous explosive combination. The mixture is known as ANFO (ammonium nitrate/fuel oil) and is commonly used in mining and demolition industries as an explosive. It is highly sensitive to shock or heat and should be handled with extreme caution.
This reaction is an example of detonation, a relative of the chemical process of combustion. ANFO (Ammonium Nitrate Fuel Oil) contains both an oxidizer and fuel source. The ammonium nitrate (NH4NO3) reacts with the alkanes in fuel oil (CnH2n+2) to produce Nitrogen (N2), Carbon Dioxide (CO2) and water (H2O).
Nitrogen is an element that is found in fertilizers and explosives. It actually is the most common element in the earth's atmosphere. It also is found below the ground. It's necessary for plants to grow their above ground shoots.Nitrogen forms compounds, some of which occur naturally as minerals. Sodium nitrate and ammonium nitrate both can be used to accelerate an explosion and both can be used as a fertilizer.A typical explosive mixture called ANFO (for Ammonium Nitrate, Fuel Oil) is created fairly easily . ANFO is used in coal mining and in making improvised explosive devices. Since ANFO is fairly insensitive, it takes a stick or two of dynamite to initiate the explosion.
Anfo's population is 489.
Anfo's population is 489.
The area of Anfo is 23 square kilometers.
Read The Third Day, The Frost. By John Marsden.
The mixture is referred to as ANFO. The explosive mixture is widely used in the mining and heavy construction industry. A hiogh expllosive detinator is required to get the mixture to release it's potential energy.
Average ANFO cost in the US is $.48 cents per pound if bought in bulk.
A gram of ANFO explosive yields about 6300 Joules of energy. The value is usually expressed as 6.3 MJ/kg.
the mixture is 2 U.S. quarts of fuel oil per 50 lbs of ammonium nitrate. or %93.7 ammonium nitrate, and %6.3 fuel oil. A blasting cap is needed to detonate anfo because it is very stable unlike Acetone Peroxide which is a good booster when using ANFO because it takes a very little amount of Acetone Peroxide to set of ANFO and Acentone Peroxide can be set of with a flame or even as little as shooting it or hitting it with a hammer can set it off because it is so sensitive.
150 yards
It is legal in some places to make ANFO if you have the necessary permits and follow safety regulations. However, ANFO is a high explosive that can be dangerous to make and handle due to its sensitivity to ignition and shock. It is recommended to purchase ANFO from licensed suppliers rather than attempting to make it yourself.
No, it can't be detonated without an explosive.
ANFO (ammonium nitrate/fuel oil) was created as a mining explosive in the 1950s by combining ammonium nitrate and fuel oil to create a more effective and economical blasting agent compared to dynamite. Its discovery was a result of efforts to improve the safety, cost, and performance of explosives used in the mining industry.