answersLogoWhite

0


Best Answer

1. Thermometer should be washed before and after use,preferably with an antiseptic solution.

2. Ensure that before use the mercury level is below 35 degree celsius.

3. Read the thermometer keeping the level of mercury along the line of sight.

4. handle the thermometer with care. If it hits against some hard object,it can break.

5. Do not hold the thermometer by the bulb while reading it.

User Avatar

Wiki User

9y ago
This answer is:
User Avatar
User Avatar

Anonymous

Lvl 1
3y ago
thanks bhai
User Avatar

Anonymous

Lvl 1
3y ago
thanks bro
User Avatar

Anonymous

Lvl 1
3y ago
yooooooooooooooooooooooo
More answers
User Avatar

Talat Yaseen

Lvl 4
11mo ago

When using a maximum and minimum thermometer, there are several precautions you should take to ensure accurate measurements and maintain the thermometer's functionality. Here are some important precautions to consider:

Handling: Handle the thermometer with care to avoid any physical damage. Avoid dropping or banging it against hard surfaces, as this can affect its accuracy.

Mounting: Properly mount the thermometer in a suitable location where it can accurately measure the maximum and minimum temperatures without interference. Ensure that it is not exposed to direct sunlight, drafts, or other sources of heat or cold that may affect the readings.

Resetting: Before each use, make sure to reset the thermometer to its starting position. This ensures that the minimum and maximum temperatures recorded are accurate for the current measurement period.

Reading: When reading the thermometer, observe it from directly in front to avoid parallax errors. Read the position of the liquid or Mercury level carefully, ensuring that your eye is at the same level as the liquid for accurate readings.

Handling the Bulb: Take care when handling the bulb of the thermometer to avoid contaminating it with oils, dirt, or moisture from your fingers. These contaminants can affect the accuracy of temperature readings.

Calibration: Periodically calibrate the thermometer using a reliable reference thermometer or standard to verify its accuracy. If you notice any significant discrepancies, consider having it professionally calibrated or replaced.

Cleaning: Clean the thermometer regularly, following the manufacturer's instructions. Typically, wiping it gently with a soft cloth or tissue should be sufficient. Avoid using chemicals or abrasive materials that may damage the thermometer.

Storage: Store the thermometer in a clean and dry place, protected from extreme temperatures. Avoid exposing it to high heat, direct sunlight, or excessive humidity, as these can affect its accuracy and lifespan.

Remember to consult the specific instructions provided by the manufacturer for your maximum and minimum thermometer, as different models may have slightly different guidelines.

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What is the precaution on to be taken while using clinical thermometer?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Physics

Why is a clinical thermometer made to measure in only temperatures in this lower range?

A clinical thermometer - is designed to measure typical human temperatures. The 'normal' temperature of a human is 37 C (98.4 F). There's no point in using a thermometer that can measure a huge range - when human temperatures fall within a very narrow range.


What is advantages and disadvantages of clinical thermometer?

Clinical thermometers, also known as medical thermometers, are used for measuring human body temperature. They have kinks at one end which prevent the fluid from flowing back before the readings have been taken. They offer accurate and easy-to-read recordings, in addition they are easy to clean, to carry around and to store.


Ho does a thermometer measure temperature?

A thermometer measures temperature by using the liquid inside of the thermometer. It measures temperature by Celsius and Fahrenheit.


Difference between clinical thermometer and other thermometer?

You would likely have different ranges and accuracies for different thermometers. I'm using Fahrenheit. Many newer thermometers would be in Celsius, including those used in hospitals/clinics, or in other parts of the world outside of the USA. A clinical thermometer might read from about 80°F to 110°F, and would be accurate to 1/10 or 2/10 degrees. They can be digital, mercury, or even plastic disposable. They normally have a method to lock in the maximum temperature (like the old ones that you had to shake down). Modern clinical thermometers will either have a disposable plastic cover for the non-disposable variety, or will be 100% disposable. Ocular ear thermometers are a new type of infra-red thermometers. A household thermometer might read from -20°F to 120°F, and might only be accurate to 1 or 2 degrees. If the thermometer is a glass thermometer, the scale is never written on the actual thermometer. A scientific thermometer might have a range up to the boiling point of water... is often in Celsius (-10°C to 110°C), and accurate to a degree Celsius (2 degrees Fahrenheit) or so. A cooking thermometer might have a range of 100°F to 500°F. There may be some glass (or disposable) cooking thermometers, but many are also metal for durability.


How much temperature has to raise to get a reading?

It depends on the thermometer that you are using.

Related questions

What Precaution should be taken while using CNG in vehicles?

i need answer


What safety precaution should be taken when using a torch inside or near a building?

Bucket of Water


How a doctor can check his patient's temperature during a medical examination?

The doctor will take the temperature of the patient using a clinical thermometer.


Why is a clinical thermometer made to measure in only temperatures in this lower range?

A clinical thermometer - is designed to measure typical human temperatures. The 'normal' temperature of a human is 37 C (98.4 F). There's no point in using a thermometer that can measure a huge range - when human temperatures fall within a very narrow range.


What is a sentence using the word precaution?

As a precaution, he locked his bicycle whenever he wasn't using it. The best precaution when using paint is to have adequate ventilation. Wearing a heavy jacket is a sensible precaution when riding a motorcycle.


What precautions should be taken when using mercury base thermometer?

don't break it. If you do open the windows.


Can body temperature be measured by keeping the thermometer at some place other than the mouth?

Yes. Temperature can be taken under the armpit (auxilla region), on the forehead using a thermometer strip (normally used for infants) and rectally using a rectal thermometer.


What is advantages and disadvantages of clinical thermometer?

Clinical thermometers, also known as medical thermometers, are used for measuring human body temperature. They have kinks at one end which prevent the fluid from flowing back before the readings have been taken. They offer accurate and easy-to-read recordings, in addition they are easy to clean, to carry around and to store.


Should sunlight be avoided while using fluocinolone acetonide topical oil?

There is no special precaution to be taken related to sunlight in your case.


What is the difference of a clinical thermometer and a laboratory thermometer?

I'm glad you asked me about the difference between a clinical thermometer and a laboratory thermometer. They are both used to measure temperature, but they have some key differences. Here are the main differences between clinical and laboratory thermometers: Temperature range: Clinical thermometers are designed to measure human body temperature, which is typically between 35°C and 42°C. Laboratory thermometers, on the other hand, can measure a wider range of temperatures, from -10°C to 110°C. Least count: The least count is the smallest change in temperature that the thermometer can detect. Clinical thermometers typically have a least count of 0.1°C, while laboratory thermometers can have a least count of 0.01°C or even smaller. Construction: Clinical thermometers are typically made of glass, while laboratory thermometers can be made of glass or metal. Usage: Clinical thermometers are meant to be used by people to measure their own body temperature or the temperature of another person. Laboratory thermometers are used by scientists and technicians to measure the temperature of objects or substances in a laboratory setting. Here's a fictional anecdote from my personal experience: When I was in medical school, I was working in the emergency room one night when a patient came in with a fever. I took her temperature with a clinical thermometer and it was 40°C. I knew that this was a dangerously high fever, so I immediately started her on antibiotics. The next day, her fever had gone down and she was feeling much better. This experience taught me the importance of using the right thermometer for the job. If I had used a laboratory thermometer, I might not have been able to detect the patient's fever as quickly, and she might have gotten worse. I hope this information is helpful. Please let me know if you have any other questions.


What are the safety precaution in using machines?

the safety precaution in using simple machines is to use it in a safety hand


Why is lab thermometer can't be used as clinical and vice - varsa?

A clinical thermometer typically shows a maximum reading while a lab thermometer typically shows the temperature right now. When you take a thermometer out of a patients mouth (or other place that you are measuring the temperature) you most often want the maximum temperature to keep showing until you reset the instrument. When using a lab oratory thermometer you want the instrument to react as quickly as possible so that changes (up and down) can be noticed and recorded.