Pulsator is like agitator, but it doesnt have a post at the centre
Mine doesnt but yours might because the spinning disk inside for measuring water is hitting something.
The banging noise you hear is caused by the tub&drum banging on the metal case of the machine. The Plastic Tub which holds the metal drum inside has a concrete block on top of it and is held up (like a swing) by suspension (most often by springs). In a wash cycle, it is perfectly normal for the tub to swing from side to side, back and forth. In your case the swinging is excessive Things you can fix: -Machine is leaning to one side (balance the feet) -unbalanced load (dont underload it, make sure heavier items are not put in on their own ect. This can be determined by seeing if your load sticks to one side of the drum when it spins) Things a proffessional can fix: -loose suspension -loose concrete weight -loose cables/pipes hitting the casing -loose drum -calibrating the elctronic speed controller (that makes sure banging doesnt happen by setting suitable speeds) Make sure you open your machine (usually from the top) and have a look inside, explore and understand. Run the machine with the top off, so you can see what is causing the noise. It is safe to do so. (Try to use any tool you have against a star bolt/screw) Thanks for reading Good luck Mr Yasser
it doesnt work, it breaks it doesnt work, it breaks it doesnt work, it breaks
The tumbler is working fine. Your problem lies with the heating function of the dryer--either the part that heats the air or the other part that tells the dryer that the clothing is dry.
Pulsator is like agitator, but it doesnt have a post at the centre
put it in the washing machine if that doesnt work then buy another :)
No you can not put bobs in the washing machine because you will be pretty much throwing away money. If you have baby powder pour that in your bobs and let it stay over night. You might have to do it twice so i would recommend doing it on the weekend. If that doesnt work go to a shoestore.
you cant. the sound is probably either a disk spinning, or the fan running so the machine doesnt melt. if its not making noise, its probably off or broken.
no it doesnt
files need to be installed how done? the graphics card doesnt know what to do, because it has no software
a toy one doesnt spin
It depends what the problem is. If the brush isn't spinning check the belt and if there is something wound around the brush keeping it from spinning. If it is a problem with suction, check the hose make sure it is not plugged and there are no tears in the hose, replace the bag a full bag reduces suction too. If it doesnt turn on at all, make sure its plugged in. You can also check the cord for damage.
Powder can't ruin your washer i dont think. But when you use powder, it doesnt always dissolve, and sometimes you will have white stuff on the clothes were the powder didnt dissolve? I dont know if that helped.
no it doesnt...... not washing your face gives you acne
i hsd the same problem with my 1990 520i. replace the fan clutch. your fan is not spinning fast enough. if that doesnt work replace the radiator.
Need to know what the problem is.