0
What is the procedure to measure the magnetizing current in transformer?
Wiki User
∙ 14y ago
i also do know the answer
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What is magneto optic current transformer?
moct is device measure the current by means of faraday's effect..
Can I connect current transformer in series?
CT(Current Transformer) is used to measure current flowing in the circuit. Current can be fully drawn or sensed in series condition. That's why , it is connected in series. In parallel , the current is divided; and hence the total current cannot be measured)
What is the difference between power transformer and instrument transformer?
A power transformer is used to provide power (to your home, for example), an instrument transformer is used to measure voltage or current (for metering, for example).
What is transformer turns ratio excitation current?
This is the current level needed to energize a transformer to its rated voltageThe clue is in the name! 'Excitation' means to create a magnetic field. So the excitation current is the current drawn from the supply which sets up the magnetic field around the core.
What winding of a current transformer carry more current?
Primary winding carry more current. We measure the current in one single wire, so no of turns are 1, in secondary the no of turns are higher. so, obviously it has higher voltage then this wire. so, finally as per the transformer rule the secondary carry lesser current than primary.
What is the role of magnetizing current in transformer?
connect 3 - phase supply to transformer primary winding.....keep transformer secondary winding open..... apply 3-phase voltage i.e.400v ac, and measure the amount of current flowing in each phase of the transformer primary winding...this current is the transformer magnetising current..... we can keep multimeters in series with the source....so we can measure directly the current readings.....(keep multimeters in current mode, and generally magnetising current will come in terms of milli amps for 400 v )
What is magneto optic current transformer?
moct is device measure the current by means of faraday's effect..
Explain differancnce between instrument current transformer and measuring current transformer?
Current transformer is a device used to measure the flow of current through a power system and the measured current is inputted to a protective relay system. It is used to detect system malfunction. Current transducer is a device used to measure AC and DC current based on the halt-effect technology.
What is the reason for using a neutral current transformer on a transformer?
A current transformer is primarily used at the neutral point of a transformer for earth fault protection. A neutral current transformer will measure any ground fault current which will essentially flow from the star point of the transformer. A fault-detection device other devices is connected to the current transformer and, if the fault current exceeds a certain trigger value, the fault-detection device will give a trip command to an earth-fault relay to disconnect the supply of electricity to the transformer.
What is a clamp meter?
It is a multimeter with a clamp on facility to measure current using it as a current transformer.
Difference between potential transformer and current trasnformer?
The difference between current transformer and potential transformer is that the secondary of a current transformer can not be open circuited while under service whereas that of the potential transformer an be open circuited without any damage to the transformer.
What is the differences between current and potential transformer?
Current Transformer- Instrument transformer used for measure high current. it hasless and thin turns in primary and more and thick turns in secondary.Potential transformer- Instrument transformer used for measure high voltage. it has more and thin turns in primary and less and thick turns in secondary.CommentUnfortunately, the original answer has got things the wrong way around for the CT! A current transformer's primary has a thicker conductor than its secondary.
Can I connect current transformer in series?
CT(Current Transformer) is used to measure current flowing in the circuit. Current can be fully drawn or sensed in series condition. That's why , it is connected in series. In parallel , the current is divided; and hence the total current cannot be measured)
How you can check load connected of transformer?
Measure the current and voltage on the secondary side.
What is the difference between power transformer and instrument transformer?
A power transformer is used to provide power (to your home, for example), an instrument transformer is used to measure voltage or current (for metering, for example).
How current transformer measure current?
A current transformer doesn't 'measure current'. It merely reduces a large current flowing through its primary to a smaller current which can be read by an ammeter connected to its secondary. At the same time, it electrically isolates the secondary circuit from the primary circuit, which is essential if the primary circuit is part of a high-voltage system.
How can measure transformer KVA?
the capacity of a transformer is defined as a product of voltage and current flowing through it.AS THE CURRENT IS MEASURED IN AMPERES AND VOLTAGE IN VOLTS, Hence transformers are measured/rated in KVA
