0
What else can I help you with?
Why is a solid mixture heavier after separation?
using water for separating
Petrol can be separete with the water?
Yes, petrol and water can be separated using a process called gravity separation. Petrol, being less dense than water, will float on top of the water, allowing them to be easily separated. Alternatively, a specialized separation technique like distillation can also be used to separate petrol and water more effectively.
How can we separate soap and oil from water using a decanter?
Oil float over the water surface; use a decantation funnel for separation.
What is the principles of gas oil and water separation?
Gas, oil, and water separation is based on the principle of density differences and phase separation. In a separator, the mixture is allowed to settle, causing the lighter gas to rise to the top, while the heavier oil and water separate, with water settling at the bottom due to its higher density. This separation can be enhanced by applying heat or using chemicals to facilitate phase separation. The process is crucial in oil and gas production to ensure the recovery of hydrocarbons while managing water and gas byproducts efficiently.
What are the disadvantages of using an oil water separator?
emulsifier. Also, a device that removes oil from water, or water from oil - depending upon its application.
What is the separation of waste from the blood by filtration through a machine called?
The separation of waste from the blood by filtration through a machine is called dialysis. This process helps to remove excess water, salts, and waste products from the blood when the kidneys are not functioning properly.
What is the report on the separation of salt and water using evaporation?
The separation is practically total.
What is moving feet about in the called?
SEPARATION FROM THE WATER
How can the separation of an oil and water mixture be achieved effectively?
The separation of an oil and water mixture can be effectively achieved by using techniques such as gravity separation, skimming, or using a separating funnel. These methods take advantage of the difference in density between oil and water to separate them.
Why is a solid mixture heavier after separation?
using water for separating
How toluene can be separated from acetonitrile without using an entrainer?
if there is large ratio between aetonitrile and toluene separation can be acheved by using water for layer separation.
What is the separation process used to purify water called?
Purification
What is a machine for squeezing out water called?
A machine for squeezing out water is called a wringer or a mangle. It is commonly used for removing excess water from clothing or fabrics after being washed.
Petrol can be separete with the water?
Yes, petrol and water can be separated using a process called gravity separation. Petrol, being less dense than water, will float on top of the water, allowing them to be easily separated. Alternatively, a specialized separation technique like distillation can also be used to separate petrol and water more effectively.
How does a washing machine get water?
A washing machine gets water by using an inlet valve that opens when you start a cycle, allowing water to flow into the machine from your home's water supply. The water level is regulated by a sensor inside the machine, which stops the flow when the desired level is reached.
How do you separate crude oil from water?
Let the water boil. After a while all you will see is the crude oil. cude oil is made up of lots of difrent substances most of thesee are chemiclas called hydrocarbons .to separte cude oil you boil the water this works because each hydrocarbon had a diffrent boiling point when this happens the oil particals allmost melts away from eachother this prosees is called separatesion
How does a deuterium depleted water machine work to remove deuterium from water?
A deuterium depleted water machine separates deuterium from water by using a process called electrolysis. This involves passing an electric current through the water, causing the deuterium to separate from the regular hydrogen atoms. The deuterium is then collected separately, resulting in deuterium-depleted water.
