BTU meters measure energy change in liquid or gas flows, it also helps to measure the total energy used or transferred in a gas system.
Pressure in an LPG cylinder is dependant of the ambient temperature and the LPG mix considered. For 70% Propane and 30% Butane at 20 degrees Celsius the pressure is 102 PSI (lb/sq.in.) or 703 KPa. Please be aware that the pressure inside an LPG vessel will not drop as vapour LPG is being used. LPG cylinder is not to be understood and dealt with as a pressurised gas storage cylinder that will drop in pressure if gas is being taken out of the cylinder. LPG cylinder contains both liquid and vapour, as vapour is being used at an appliance the liquid vaporises under natural conditions and generates more vapour, hence the efficiency of the LPG storage systems.
LPG.
Gaseous particles possess high speed and large spaces between them. Particles of LPG diffuse into these gaseous particles at a very fast rate and reach our nostrils. This enables us to smell the LPG.
Filling pressure in lpg cylinder is 14 kg/cm2 to 16kg/cm2 . maximum filling pressure is 16.95kg/cm2
270:1
at 100% efficency 1 cubic foot of propane ( it's no longer liquid or LPG ) = 2668.3431 BTU's
1
Propane = 91,600 btu per gallon
No, it's 3.85 litres. This is because LPG is pressurised.
1000 litres = 1 cubic metre: of LPG or air or concrete.
The density of domestic LPG in gaseous form is 2.155 kilograms per cubic meter. Its density in liquid form is 553 kilograms per cubic meter.
1886 kg
Without a temperature and pressure, you can't, besides which LPG is usually a liquid until just before use.
There are 1,000 liters of liquid gas in 1 cubic meter of LPG gas. The answer would be different if the conversion is from pressurized volume to unpressurized volume.
yes
1.2 meter
If you're using a 4500 btu burner at half power (that is, you're trying to cook food, not char it), you're using 1/10 pound of LPG per hour.