0
What else can I help you with?
What is thermal resistivity of soils?
Thermal resistivity of soils is a measure of how well a soil can conduct heat. It is the reciprocal of thermal conductivity and is used to quantify the ability of a soil to resist the flow of heat through it. Thermal resistivity is an important parameter in geotechnical and geothermal engineering applications.
Water resistivity depends on?
Several factors influence water resistivity. Some of the most important are 1) the concentration of ions in the water; 2) the mobility of the ions in the water (smaller ionic radius ions tend to decrease water resistivity more than larger ionic radius ions); 3) the oxidation state of the ions; and 4) the temperature of the water.
What is the luster of a graphite?
Graphite is black and posseses dull appearance
What is the resistivity of sand sandstone and shale?
The resistivity of sand can vary widely, but generally ranges from 1,000 to 10,000 ohm-meters. Sandstone typically has a resistivity of around 1 to 100 ohm-meters. Shale generally has a resistivity of 0.1 to 10 ohm-meters.
What is electrical resistivity of molybdenum?
The electrical resistivity of molybdenum is approximately 5.50 x 10^-8 ohm-meters at room temperature. It is considered a good conductor of electricity due to its relatively low resistivity compared to insulating materials.
Is pencil lead a resistor?
It is not a resistor, but not to say it's a good conductor. Although it lacks the metallic bonding that makes Cu such a good conductor, the sheets of graphite have hybridized sp2 orbitals, meaning there are long rows of p orbitals that can share electrons across the sheet, meaning it can conduct electricity. It has a resistivity of ~20uOhm meters, whereas as Cu has a resistivity of ~17nOhm meters.
When a sample of germanium and silicon having same impurity density are kept at room temperature then resistivity of both?
The resistivity of germanium will decrease with increasing temperature due to a positive temperature coefficient of resistivity, while the resistivity of silicon will increase with increasing temperature due to a negative temperature coefficient of resistivity. At room temperature, silicon will have a higher resistivity compared to germanium.
Does high resistivity have a higher number or lower number?
High resistivity corresponds to a higher numerical value. In the context of materials, resistivity is a measure of how strongly a material opposes the flow of electric current; materials with high resistivity, like rubber or glass, have larger resistivity values compared to conductive materials like copper or aluminum, which have low resistivity values.
If the diameter of wire is double what is resestivity?
Resistivity won't change. Resistivity is a material property that doesn't depend on the shape.
Do wires that have high resistivity have high conductivity also?
No. In fact it is the opposite. Conductivity is the reciprocal of resistivity so a high resistivity means low conductivity. peace.
What are the formulae of resistivity?
There is no 'formula' for resistivity. The resistivities of different conductors have been determined by experiment.
Can resistivity be negetive?
No, resistivity cannot be negative. Resistivity is a material property that indicates how strongly a material opposes the flow of electric current. It is always a positive quantity, even though some materials may have very low resistivity values.
What is the resistivity of deionized water and how does it compare to the resistivity of other types of water?
The resistivity of deionized water is high, meaning it is a good insulator. It is higher than the resistivity of tap water or seawater, which have more dissolved ions and conduct electricity better.
What is resistivity on what factor is depends?
Resistivity is a measure of a material's ability to resist the flow of electric current. It depends on factors such as the material's composition, temperature, and dimensions. Materials with high resistivity impede the flow of current more than those with low resistivity.
How are materials classified on the basis of resistivity?
Materials can be classified based on their resistivity as conductors, semiconductors, or insulators. Conductors have low resistivity, allowing electric current to flow easily. Semiconductors have resistivity in between conductors and insulators, and their conductivity can be controlled. Insulators have high resistivity and do not allow electric current to flow easily.
What is the value of resistivity of human skin?
The value of resistivity of human skin is 0.2 Ohm-meters
What is the value of resistivity of eureka?
The resistivity of Eureka is approximately 2.8 × 10^-6 ohm-meters.
