Square feet is two-dimensional. A flat area 20 feet wide by 10 feet deep is 200 square feet. But cubic feet is three-dimensional. Think of a box 12" wide by 12" deep by 12" high. That's a cubic foot. To determine cubic feet, take the width x depth x height (in inches) and divide by 1728.
There is insufficient information to answer the question.
The room could be approx 44.7 ft * 44.7 ft
or 40 ft * 50 ft
or 25 ft * 80 ft
or 20 ft *100 ft
or 10 ft * 200 ft
and that is only considering some of the integer solutions.
10 feet by 20 feet would give you 200 feet
If the room was 20 feet x 10 feet it would have an area of 200 square feet.
Any size room where the length in feet times the width in feet equals 200.
200 cubic ft IS a measure of the volume/size of the room.
Multiply width by length to get the area. The answer could be 10 by 20 feet.
2 ft = 0.6096 meters.
It would help to know what units of measurement are used for 20*20*8. Are they feet or yards or metres or something else?But in the US, most rooms are measured in feet, and 8 feet tall is about right for a room in a house, so (20 ft)*(20 ft)*(8 ft) = 3200 cubic feet.
One cubic foot is 1728 cubic inches, so 27648 cubic inches equals 16 cubic feet.
7.481 gal - 1 cu ft; 17,000 gal = 2,272.42 cu ft
150,000 cubic ft
3 measurements are needed to calculate volume. IF your room has an 8 ft ceiling then it is approximately 800 cu ft.
16ft x 12½ft for example
2 cubic ft to 6 cubic ft is a 200% increase.
A typical room can have 5 to 6 times more volume than the 200 cu.ft given. Example: 15 ft long x 10 ft wide x 8 ft high = 15*10*8 = 1200 cu.ft.
That is 3,000 cubic ft.
How many cubic ft.in a room 12 ft.by 10.6 ft. by 8 ft. high?
100 cu ft × 2 = 200 cu ft.
You must know the height of the room to determine this. If the room has a flat 8 foot high ceiling there are 1664 cubic feet of volume in the room
Big enough to contain about 1,556 gallons of water.
That is 1,152 cubic ft.
200 cubic feet.
1000L equates to about 35.31 cubic feet.