What is the size of the Kenmore 80 series model 110 92380200?
this is use gas or electrical
what year was this model (kenmore 363.9761585) built and what size is it?
22 cubic feet
Kenmore made several washers over the years in the 80 series. The average size for capacity was 3.2 cubic feet of load space.
According to Sears it is a 2003 model that was 22 cubic feet in size.
2005 i have one.
The Kenmore model 385.1884180 takes a Class 15 bobbin. They recommend plastic, but metal can also be used. Such bobbins are still generally available.
I believe it's 25.5 cubic feet
24.8 cuft, 2008 year model. Got one its great.
For Kenmore refrigerators, the 3rd digit after the decimal point indicates the capacity. Your model number would be written as 253.63894300. The 3rd digit after the decimal point is an 8. Your refrigerator is 18 cubic feet.
The washer was made in 1989.... The model number is read as the 1st and 3rd digits that represent the year made.
I did not have any luck with an online search, but I found that Searspartsdirect has a chat function where you could get an answer.
Have the instruction book but does not mention so I have the machine and I would say same size as the singer but are metal OK ( bobbin ) Most Kenmore sewing machines (including this one) take class 15 bobbins which you can find at Joann's, Walmart, and most places that deal in sewing machines. They come in either plastic or metal.
Attach the buttonhole foot. Set the setting for buttonhole (bh). Sew. You adjust the buttonhole size by sliding the rear part of the buttonhole foot forward and back.
Kenmore canister vacuum cleaners come in variety of models and can range in pricing from around $70 to nearly $300.00. The full size models vary in pricing from $200-$300, but the less popular colors may actually save you some money. The lime green model goes for nearly $100 less than the 'blueberry' model.
It is 22 cubic feet.
One Answer: If you look at the control panel on the door you can see that it's very similar to Whirlpool Gold control panels. I also asked sears.com chat person and he confirmed that it is Whirlpool. Whirlpool also makes: Kitchenaid, Jennair, Maytag, as well as Whirlpool. Second CORRECT Answer: As usual, someone just offers an answer and really doesn't do ANY research. Then accepts an answer from a salesperson as gospel! Wow, I'd like… Read More
Yes, you can take them out of the cabinet by loosening two grub screws that hold the machine on two posts. If the machine has a foot control, you are all ready to use it as a table top model. You can also put it in a Kenmore carrying case. Kenmores are a different size than other machines, so they have to go in a Kenmore carrying case or cabinet. If the machine has a… Read More
I have a Kemore Elite (model #596.76593600) The ice maker and water dispenser have stopped working. Would these be two seperate problems to fix or could there be one part to be replaced that would correct both problems?
You need a White Rotary bobbin. They are currently available (as of Dec 2011). You can get them through Quality Sewing in Tacoma, WA. Their website is QualitySewing.com but I do not know if they can be purchased through the website.
He had (or maybe still is, not sure) played on his own model Marcinkiewicz mouthpiece (the E18 in their signature series). This mouthpiece is also similar to the Schilke 13A4a.
The 1950 Plymouth Deluxe Series P19 used a 6.4x15 size tire. 6.4 x 15" or 6.7 x 15" depending on the model.
Normally most 385.prefix kenmore use class 15 bobbins. If it's a drop in bobbin, they tend to prefer the plastic ones. You can find these at Joann's, Walmart(I just picked up a 4 pack of them at Walmart for 99 cents.) other sewing shops and through sears.com. Your manual should show you which bobbins to use and if you don't have the manual, you can download it at managemylife.com
Take the cover off where the controls are at and there is a pressure switch with a hose connected to it. It should be round, about 2- 2 1/2 inches in diameter and maybe an inch thick. If your washer has a load size adjustment, it is what the knob attaches to.
1.6 On the rovers the first number is the series model, yours being 4 makes it a 400 series.. the last two are the engine size yours being 16 makes it a 1.6L (commonly termed as a sixteen hundred engine) hope that helps.
A: It not size but rather capacity. the capacity will be the ac power consumption AC volts X AC current that will get Watts. So the capacity of the inverter should be the same watts plus a safety and efficiency power if the watts is 100 watts i would buy a 125 watts minimum
The BMW 5 series E39 is a luxury car. It was made in both sedan and station wagon form. It is considered to be a mid-size car. Production of this model ceased in 2004.
It is a model who is thin enough to be a Size 0.
I have a 1979 Kenmore dryer, and the belt is 92-1/4". It has 5 ribs/4 grooves, and measures at 5/16" wide, though it may have been 1/4" wide when new. Good luck -
What is the thread size for a Winchester Model 90?
There is 3 primary stock engines for this model. * LG6 3.1L v6 * L27 3800 (series 1) v6 * LA1 3400 v6
See sources and related links below and punch in Dodge, 1977 and which W-series model you have (W200, W500, etc).
Usually, XL is the most common plus size for the model. In these days, many companies are using size L model. Because it's hard to find XL female model with curve.
The 2007 BMW 3-Series has a 3.0 L base engine size.
The 2006 BMW 7-Series has a 4.8 L base engine size.
The 2002 BMW 3-Series has a 2.5 L base engine size.
The 2012 BMW 5-Series has a 2.0 L base engine size.
The 2004 BMW 5-Series has a 2.5 L base engine size.
The 2002 BMW 5-Series has a 2.5 L base engine size.
The 2006 BMW 5-Series has a 3.0 L base engine size.
The 2010 BMW 7-Series has a 4.4 L base engine size.
The 2005 BMW 7-Series has a 4.4 L base engine size.
The 2004 BMW 6-Series has a 4.4 L base engine size.
The 2014 BMW 4-Series has a 2.0 L base engine size.
The 2013 BMW 6-Series has a 3.0 L base engine size.
The 2008 BMW 6-Series has a 4.8 L base engine size.
The 2013 BMW 3-Series has a 2.0 L base engine size.
The 2010 BMW 1-Series has a 3.0 L base engine size.
The 2003 BMW 5-Series has a 2.5 L base engine size.
The 2008 BMW 1-Series has a 3.0 L base engine size.