1998-2000 2.4L is 0.050
I won't swear to it, but it should be .045. That is for a 3.1L engine.
The 1988 Chevy Cavalier spark plug wires are quite easy to remove. The spark plug wires simply pull off on each end. Put the new spark light wires on by pushing downward on each end.
Take the valve cover off and the plugs will be right under it
.045
Listed under the hood on a placard.
.31 to.35 by service manual
4...under the coil cover
a/c delco is the best
When you buy your AC-Delco recommended spark plugs, the person who identified the spark plugs for you at the parts shop can find the gap on the computer he used to identify, and gap them for you. Most cases, the spark plug is already gaped because it is matched with the car, especially if you buy AC-Delco Plugs as the manufacturer suggests.
you must take the top module off the engine and then remove the rubber plugs that are on top of the spark plug, then use the spark plug sockets to get them out you must take the top module off the engine and then remove the rubber plugs that are on top of the spark plug, then use the spark plug sockets to get them out you must take the top module off the engine and then remove the rubber plugs that are on top of the spark plug, then use the spark plug sockets to get them out
Drivers front side of the rad.Just found it last week.
According to the haynes manule '95-'97= 0.060 inch '98-'01= 0.050 inch . But, you would be wise to call a parts store just to be sure...Haynes has been wrong before