Any wood glue is fine and will be stronger than the wood it's self when done correctly. Titebond is excellent, and is also available in a waterproof version (Titebond3), as well.
Keep everything clean, clamp the joint, firmly without crushing the material, and don't expect end grain, to glue up strong, no matter the species of wood. Research how to glue up wood if you don't know, it takes more than good glue to make a good joint, in wood.
PS wipe up your glue squeeze out, with a damp rag.
The best glue for balsa wood is contact adhesive.
ANS 2 -the best glue for balsa wood is yellow carpenter's glue. Use pressure (a clamp) to hold it together at least 4 hours.
TiteBond lll is the strongest wood glue ! - A very strenuous test was run last year by "Fine Woodworking "magazine and a national university science department. 12 wood glues were tested in different ways and pulled or wrenched apart while being filmed . TiteBond lll came out the leader by quite a margin.
White or yellow wood glues are best for balsa wood. Use very small quantities.
5 min. epoxy
ANS 2 - Carpenters yellow glue is best for balsa wood.
you have to use the strongest glue like the plan glue
Wood glue is better FOR GLUING WOOD than any other type of glue !
Many companies make "wood glue", specifically to be used on wood projects. Buy a good brand, such as Elmer's Wood Glue.
Glue laminated
White glue is strongest at room temperature when applied to moderately porous wood surfaces. It does not adhere well on shiny wood surfaces.
the pambansang narra is the strongest tree in the pilipinas
There isn't one type of school glue that is universally the strongest as it depends on the materials being glued together and the application. However, epoxy and super glue are generally considered to be some of the strongest types of glue available for various bonding needs.
Standard yellow wood glue (PVA glue) is the best TYPE of wood glue. Type 1 PVA - or waterproof PVA glue - should be used when any water exposure is possible, and on some woods is stronger than standard PVA wood glue. Most important is a tight fit and clamping. The brand of glue is not as important as the type.
Elmer's glue or any white glue will do this.
Use wood glue for wood to wood, to glue a cabinet back together you need to remove the old glue so that you have a clean wood to wood contact if this can't be done you can use epoxy glue, go to your local hardware store ask for help and tell them what you are working on and they will help on the type of glue you need.
Yellow carpenters glue, or Tite Bond 2 are both good for that. Leave joint clamped for 4 hours .
GORILLA GLUE IS STRONGEST. more durable and easier to use