usually it is about 300 degrees Fahrenheit
Wool
it seems like it's two dots
It's a hot setting . . . at the top end of your iron. Try the "cotton" setting. That should be about 400 degrees Fahrenheit.
The iron rod becomes shinier and the wool cloth wears out. If you rub the same wool cloth on a hard rubber rod, the rod will become charged with static electricity and you will be able to pick up small bits of paper with it---whoopee!
Not sure if this is a serious question but...A kilogram is a unit of mass, or in this case, weight.A kilogram is a kilogram.One kilogram of anything is a kilogram.1 kg of iron = 1 kg of wool.
Wool
100F
it seems like it's two dots
The temperature of the sole plate of an electric iron depends on the setting of the number of "dots".Three dots or hot iron. Maximum sole plate temperature of 200 °C.Two dots or iron at moderate temperature. Maximum sole plate temperature of 150 °C.One dot or iron at low temperature. Maximum sole plate temperature of 110 °C.Nevertheless the accuracy of the sole temperature in relation to the iron setting is the responsibility of the iron manufacturer.
If the felt is regular craft felt, it's made of polyester, so use the setting for polyester. If it's the more expensive kind, it's probably made of wool, so use the setting for wool.
The cotton setting on an iron is approximately 193 degrees Fahrenheit.
You could iron wool with a hot-enough iron to set it on fire.
According to SkiWax.ca approximately 204 degrees F
Hot iron for best results!,steam iron is a great help when fabric has become a little dry.
steel is made from a mixture of iron and carbon so yes, steel wool definitely has iron in it
Place felt onto ironing board and place a cloth over it, a pillow case will work then iron on a low or wool setting, make sure you keep your iron moving to avoid having the acrylic felt melt or the wool felt shrink. Hope this helps!
The Flourine goes Grey and starts to dissolve into the Iron Wool