It depends on the thickness of the sheet which usually comes in between 0.1 to 1 mm thickness. For the same area, the later one is 10 times more heavier than the former one. Now consider a sheet with 0.63mm thickness. As the density of the steel is 8, the weight of sheet would be 8*0.63=5.04 kg/sq. meter
One with length and breadth, but no thickness. You could it out of a sheet of paper.
A sheet of 1/8" masonite weighs .59lbs/sq. foot or 18.88lbs/sheet. (.59 x 32sq.ft)
It depends on the size of the room. You need to measure the area to be covered and the area of the sheet rock
For area measurements, you multiply the length by the width. Here the calculation gives you an answer of 24 square feet.
7,200 square feet. This is an easy calculation - just multiply the length by the width. The answer is the number of square feet.
The weight of polypropylene sheets depends on their length, width and thickness.
specific weight of the sheet * area *thickness = weight of the sheet
The answer is 12,553 m.
Size of sheet is mentioned in length , width [either in millimeters(mm) or meters(m)] and thickness in millimeters(mm) Base Density of Aluminum - 2710 kg/cubic meter For 6 mm thickness of sheet for dimensions length - 2438mm width -1219mm Weight of sheet is calculated as follows - -Convert length and width dimensions of mm into meters 2438/1000 = 2.438m and 1219/1000 = 1.219m and 6.3/1000 = .0063m - Area per sheet - 2.438 x 1.219 = 2.97 sq.m - Weight = Area x thickness x density = 2.97 x .0063 x 2710 = 50.7 kgs approx.
we can weight one sheet and calculate the unit weight we can weight one sheet and calculate the unit weight
If it section is a rolled like beam,channel,square,angles&flat. weight=Length x unit weight unit weight of this section is=123kg/m^3 If it is plate or sheet weight=Length x width x thickness x 7.85(sp.gravity of steel)
8*4 G.I sheet weight
It is simple ! = length in meters *width in meters *thickness in mm*density of the material (i.e 8.1 in this case )
ON the cad offset the bend radius from the internal radius of the sheet metal part by 40% of the total sheet thickness,and measure the chord length of the radius. that will be the developed length.
friend use formula weight of iron sheet = l*b*t* 7.85 where; l => lenght of the sheet b => breadth of the sheet t +> thickness of sheet and 7.85 is taking as constt.
This depends on the size of the sheet and basis weight of the sheet. The basis weight is weight of sheet in gram or pound for a unit area. In metric system it is gm/m2.
the weight is equal to density x volume density of aluminum is 2.77 g/cc = 0.00000276 kg/mm^3 WEIGHT= 1200 = .00000277 x 2515 x.8 x LENGTH LENGTH = 1200/.00000277/2515/.8 = 215,300 mm = 215.3 meters