A #32mm rebar weighs 6.404 kg/m.
US equiv is a size #10 which is 4.303 lb/ft.
The unit weight of deformed rebar 32mm in diameter is approximately 2.47 kg/m.
20 mm bar weight = 2.47 kg/m
Type your answer here... 6.243
0.888 kg/lm
1.58 kg/m
6.31 kg/m
The unit weight of rebar (steel reinforcing bar) with a diameter of 36mm is approximately 3.18 kg/m.
The typical unit weight of rebar is about 490 pounds per cubic foot (pcf). This value may vary slightly depending on the specific type and size of the rebar being used, but 490 pcf is a commonly used estimate.
The unit of measurement for rebar thickness, such as 14mm, is in millimeters (mm). This measurement refers to the diameter of the rebar.
The weight per meter for a 32mm 6x29FI IWRC steel wire rope is approximately 9.47 kilograms per meter. This figure may vary slightly depending on the specific manufacturer or tolerances. It is important to consult the manufacturer's specifications for precise measurements.
The unit weight of ISMC 200 is approximately 24.2 kg/m.
The unit weight of rebar (steel reinforcing bar) with a diameter of 36mm is approximately 3.18 kg/m.
32mm MS Rod 1Meeter Lenth
0.222
The typical unit weight of rebar is about 490 pounds per cubic foot (pcf). This value may vary slightly depending on the specific type and size of the rebar being used, but 490 pcf is a commonly used estimate.
=1.041
6.568 kg/m
You have to find a chart that will indicate the weight per unit of measure for the appropriate rebar size. Than take that and multiply it by the the length of the rebar. For example, a #4 rebar weighs 0.668 lbs/ft. If you have 5 @ 20-00 pieces that is 0.668 X 20 X 5 = 67 lbs. Charts are available throughout the web or at CRSI.org.
22mm diameter deformed bars unit weight kilogram per meter
0.395 kgs = unit wt of 8 mm dia rebar There is another way of calculating the specific weight (or unit weight) of a rebar. Especially for those who are interested of rebars less than 10mm of dia. the way is to calculate it mathematically knowing that the density of steel rebars is 7851 Kg/m3. 8mm rebar ==>Unit weight [Kg/m] = Cross-Sectional Area [m2] x Density [kg/m3]= (Pi)x(radios)2 x 7851 kg/m3 = 0.395 Kg/m Good luck !!
You have to find a chart that will indicate the weight per unit of measure for the appropriate rebar size. Than take that and multiply it by the the length of the rebar. For example, a #4 rebar weighs 0.668 lbs/ft. If you have 5 @ 20-00 pieces that is 0.668 X 20 X 5 = 67 lbs. Charts are available throughout the web or at CRSI.org.
You have to find a chart that will indicate the weight per unit of measure for the appropriate rebar size. Than take that and multiply it by the the length of the rebar. For example, a #4 rebar weighs 0.668 lbs/ft. If you have 5 @ 20-00 pieces that is 0.668 X 20 X 5 = 67 lbs. Charts are available throughout the web or at CRSI.org.
3.04kg/mtr for 32mm(M) also used as riser pipes for Hand Pump Mark-II