0.395 kgs = unit wt of 8 mm dia rebar There is another way of calculating the specific weight (or unit weight) of a rebar. Especially for those who are interested of rebars less than 10mm of dia. the way is to calculate it mathematically knowing that the density of steel rebars is 7851 Kg/m3. 8mm rebar ==>Unit weight [Kg/m] = Cross-Sectional Area [m2] x Density [kg/m3]= (Pi)x(radios)2 x 7851 kg/m3 = 0.395 Kg/m Good luck !!
9.8kg per m
3.4 lbs/ft or 5.06 kg/m
Calculate the length of steel you are going to use the building and muliply the length with unit weight of the steel.ex: 12 m 25mm steel weight is12 x 3.85 =46.2 kg3.85 kg/m is the unit weight of 25mm bar
8mm rebar weighs 0.395kg/m
Unit weight of 36mm rebar is 7.99 kg per meter
=1.041
53.2
The typical unit weight of rebar is about 490 pounds per cubic foot (pcf). This value may vary slightly depending on the specific type and size of the rebar being used, but 490 pcf is a commonly used estimate.
43.50
You have to find a chart that will indicate the weight per unit of measure for the appropriate rebar size. Than take that and multiply it by the the length of the rebar. For example, a #4 rebar weighs 0.668 lbs/ft. If you have 5 @ 20-00 pieces that is 0.668 X 20 X 5 = 67 lbs. Charts are available throughout the web or at CRSI.org.
0.395 kgs = unit wt of 8 mm dia rebar There is another way of calculating the specific weight (or unit weight) of a rebar. Especially for those who are interested of rebars less than 10mm of dia. the way is to calculate it mathematically knowing that the density of steel rebars is 7851 Kg/m3. 8mm rebar ==>Unit weight [Kg/m] = Cross-Sectional Area [m2] x Density [kg/m3]= (Pi)x(radios)2 x 7851 kg/m3 = 0.395 Kg/m Good luck !!
You have to find a chart that will indicate the weight per unit of measure for the appropriate rebar size. Than take that and multiply it by the the length of the rebar. For example, a #4 rebar weighs 0.668 lbs/ft. If you have 5 @ 20-00 pieces that is 0.668 X 20 X 5 = 67 lbs. Charts are available throughout the web or at CRSI.org.
6mm Thk MS plate weight for one metre
0.88888
You have to find a chart that will indicate the weight per unit of measure for the appropriate rebar size. Than take that and multiply it by the the length of the rebar. For example, a #4 rebar weighs 0.668 lbs/ft. If you have 5 @ 20-00 pieces that is 0.668 X 20 X 5 = 67 lbs. Charts are available throughout the web or at CRSI.org.
The weight of rebar can be calculated using the formula: weight = (diameter^2 * length * 0.006165) kg, where the diameter is in mm and length is in meters. Substituting the given values, the weight of the rebar would be approximately 22.98 kg.