The 2 metals have different coefficients of expansion so when the strip heats up it bends. This bending is arranged to separate an electrical connection so that the electrical power causing the heating is switched off, and then back on again when things cool back down slightly.
The two metals chosen for the bimetallic strip have different modulii of thermal expansion, The bimetallic strip bends as the temperature changes and so the strip can be used to activate relays or other electronic switches and so work as a thermostat.
A bimetallic strip is made out of steel and iron
A bimetallic strip is a strip with two metals bonded together. It can be found in thermostats
A bimetallic strip is used in a thermostat, by concealing it inside. When the temperature goes up, the bimetallic strip expands, and turns on the circuit for the AC/compressor ,to make the temperature cooler inside wherever the thermostat is.Two metal strips of differing thermal expansion are bonded together. Because the expansion is different the metals expand by different amounts. When heated the strip therefore has to bend, the one with the greater expansion on the outside of the curvature. As the strip bends it can either make or break a circuit contact depending on the configuration of the circuit, switching on of off the current. The reverse is true when the strip cools again.
A bimetallic strip is made out of copper and steel.
thermostat
conversion calculator thermostat
Bimetallic strip
The two metals chosen for the bimetallic strip have different modulii of thermal expansion, The bimetallic strip bends as the temperature changes and so the strip can be used to activate relays or other electronic switches and so work as a thermostat.
Bimetallic strip
yes
The bimetallic strip bends.
fire alarm
A bimetallic strip is made out of steel and iron
When the temperature of the iron increases, the bimetallic strip bends upwards. This breaks the contact between the strip and the heating coil. When the temperature falls, the bimetallic strip bends down and the contact is restored.
A bimetallic strip can be used as a thermometer or thermostat. The two metals expand at different rates which will make it bend. You can use this to find the temperature of an oven. When the temperature of the oven increases, the strip will curve and break the electrical contact which make the oven cool down. When the oven cools the bimetallic strip will become straight again and the electrical contact will be remade and the oven will begin to reheat again.
A bimetallic strip is a strip with two metals bonded together. It can be found in thermostats