answersLogoWhite

Top Answer
User Avatar
Wiki User
Answered
2009-07-25 22:10:43
2009-07-25 22:10:43

front rotors are 25mm standard min is 22mm back rotors are 8.5mm min

001
๐Ÿฆƒ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions



Ford XH Falcon was created in 1996.


Ford EL Falcon was created in 1996.



It is important to maintain your brakes properly. The minimum brake rotor thickness for a 2003 Ford Ranger is 0.99 inches.


The minimum thickness of brake shoes on a 2002 Ford Focus LX is 0.32 inches. Whey they fall below this thickness, they lose much of their stopping power.



DOT 3 is the fluid for you.


What should the thickness be on the front brake lining for ford ranger 2010


how to change brake lines on a 1996 ford econoline e-150


The minimum thickness number should be cast into the rotor.


it is hissing because there is a vacume leak in the brake booster it will require a new brake booster


DOT 3 brake fluid ( meeting Ford specification ESA-M6C25-A ) is used in your 1996 Ford F-150


According to the 1996 Ford Explorer Owner Guide : ( DOT 3 brake fluid ) meeting Ford specification ( ESA-M6C25-A )


The min thickness should be stamped on the backside of the rotor, pull and examine.


The minimum brake rotor thickness for a 1994 Ford Thunderbird car is .974 inches for the front rotors and .657 inches for the rear rotors.



For a 1996 Ford Bronco : DOT 3 brake fluid ( meeting Ford specification ESA-M6C25-A )



DOT 3 brake fluid ( meeting Ford specification ESA-M6C25-A )


Actually , the 1996 Ford Explorer has small emergency brake shoes inside the back of the disc brake rotors on the REAR brakes only


1996 ford falcon xr6 ute is in the XH range. the XH's range is April 1996-1999. it is hard to tell exactly what you are asking but hope this helps :P



It depends if 4 WD or just FWD and what year model Generally: FRONT: Brake pad minimum thickness 3.0 mm (0.118 inch) Brake pad maximum taper wear (in any direction) 3.0 mm (0.118 inch) Brake disc minimum thickness (disc-drum system) 22 mm (0.866 inch) Brake disc minimum thickness (4-wheel disc brake system) 24 mm (0.944 inch) REAR: Brake Pad Brake pad minimum thickness 3.0 mm (0.118 inch) Brake pad maximum taper wear (in any direction) 3.0 mm (0.118 inch) Brake Disc Brake disc minimum thickness 11.0 mm (0.433 inch)


22mm is the minimum rotor thinckness for the front and 12mm for the rear's



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.