YOU NEED TO TAKE THE VEHICLE BACK TO WHOEVER "FIXED" IT. If you did the job yourself go look in the mirror and repeat "I am NOT a Mechanic".
make sure it is in drive
It is the distance between floorboard and pedal top, when the brake pedal is fully depressed (after applying brakes).
A dashboard light appearing when brake pedal is depressed usually means brake fluid is low.
check the brake pedal, there is a switch on the back of the pedal that depressed when the brake is depressed that turns the lights on, when this is loose it keeps the lights on.
In the Mazda Demio, the "Hold" feature refers to a function that helps maintain the vehicle's position on an incline without the need for the driver to keep pressing the brake pedal. When activated, it temporarily holds the vehicle in place, preventing it from rolling backward or forward when starting on a slope. This feature enhances convenience and safety, especially in hilly areas. It typically engages automatically when the driver comes to a stop on an incline.
most bmx bikes dont have front brakes now ans if you pedal backward and it has pedal brakes its not a bmx bike
The reverse pedal bike functions by allowing the rider to pedal backward to move the bike in reverse. This is unique compared to traditional bicycles, which only move forward when pedaled. The reverse pedal bike is designed with a special gear system that enables this backward movement, providing added convenience and versatility for riders.
Is your clutch pedal depressed? If it is, check switch on clutch pedal.
If the vehicle is equipped with a fuel injection system, it may be clogged. When a vehicle has fuel injection, the gas pedal does not need to be depressed to get it started. It sounds like the vehicle needs to be taken to a mechanic.
By A Chevy
An icv is an idle control valve. It controls the idle of the car (without the accelerator pedal depressed).
Shifter is blocked by a device attached to the brake pedal. If the brake pedal is not depressed it wont allow you to change out of park. There should also be a bypass button next to the shifter, in case the cable to the pedal breaks.
It is because the brake light switch under the brake pedal is faulty. usually replacing this will solve the problem. it is designed in such a way that when the brake pedal is depressed the switch completes a circuit and the lights come on. the fault occurs when the switch closes the circuit even though the pedal is not depressed. hope this helps.