G12 mixed half and half with distilled water.
To bleed the coolant system on a 1998 VW Beetle, remove the top from the overflow tank. Run the car for 10 to 15 minutes to force any air out of the system, then check the coolant level. Add coolant as needed.
Start by taking the top off of the coolant overflow reservoir. To bleed the system, run the 1998 VW 2.0 Beetle about 10 minutes, then check the coolant level. Add coolant if needed, then replace the reservoir top.
2004 vw beetles have an aluminum engine therefore require the blue colored coolant.
Mine came on to tell me that the coolant was low. check that. Remember to use the right kind of coolant and don't mix different kinds.
any dex-cool coolant but you must make sure it say's dex-cool on it.
You can use universal coolant which you can find in any auto parts store, or you can use a coolant for Japanese card, or you can go and get coolant at a local Toyota dealer.
where is the starter relay on a 1998 vw beetle
old beetles dont use coolant
what is the torque 1998 beetle front spindle
2000 Volkswagen Beetle L4-1781cc 1.8LFig. 2 Engine Coolant Temperature (ECT) sensorThe engine coolant temperature sensor is installed in the coolant return (arrow), located between the cylinder head and the radiator
Coolant for a 2006 VW Bettle is put into the coolant overflow tank. As it is needed, the radiator will automatically pull in additional coolant.
Need to release air from the radiator,where is the bleeder valve on 1999 VW beetle