The proper fuel mix for all Husqvarna two cycle engines is 50:1 or 2.6 oz of oil per gallon of unleaded 89 octane or higher gasoline.
25to1
50:1
Go 50:1.
Mix 1/2 pint (8oz.) for every gallon of gas. 16:1 Ratio
The mix ratio is 50:1, but be sure to use a good 2 cycle oil such as Husqvarna's or Echo's. Do use a motor boat or motorcycle 2 cycle oil. Those are not rated for the small engines like used in the 141 chainsaw. Best bet is to buy the oil at a reliable mower shop.
The Husqvarna Rancher 55 chainsaw typically requires a fuel-to-oil ratio of 50:1 when using a high-quality two-stroke oil. This means you should mix 2.6 ounces of oil per gallon of gasoline. Always refer to the owner's manual for specific recommendations and ensure you use the correct type of oil for optimal performance.
Need to know the fuel oil mix for craftsman chainsaw Model #917.353736.
jonsered oil/gas mixture ratio is 50 to 1.
For a Husqvarna blower, the recommended oil-to-gas ratio typically is 50:1, which means you should mix 2.6 ounces of 2-stroke oil with 1 gallon of unleaded gasoline. Always check the owner's manual for your specific model to confirm the correct ratio, as it may vary. Using the proper mix ensures optimal performance and longevity of your blower.
The fuel mix ratio for a 1985 Poulan 16 chainsaw is typically 40:1, which means 40 parts gasoline to 1 part two-stroke engine oil. This ratio is commonly used for many two-stroke engines to ensure proper lubrication and performance. Always check the owner’s manual for the specific model to confirm the exact requirements.
I just bought this model and was told by the local bike mechanic to run 30 to 1. Not sure what the manufacturer states though as I didn't get a manual with it.
25 : 1