1342
6 spark plugs
Torque the spark plugs to 11 lb/ft.
how to change spark plugs on a 97 mercury mountaineer
1-2-3-4-5-6
To change spark plugs a person must start with a car that is off, then disconnect the batter. The person must then remove the spark plug cables, remove the spark plugs, and replace them with new spark plugs. After that, one must put the spark plug cables back in the correct order, then connect the battery.
where is the location of the spark plugs on a 97 BMW 318 ti.
Where and how do you find the spark plugs for a 1997 ford expedition?
Remove each of the coils then remove and replace the plugs
Um, ALL cars/trucks/SUV's have spark plugs. What a stupid question.
The Spark Plug Gap.054 (In thousandths of an inch)
at the end of the plug wires in the head
Remember the order of spark plug wires while connected. Disconnect spark plug wires. Make sure that there is no sand or dirt around before removing the plugs. Remove the spark plugs. It's a good idea to have a magnetic spark plug socket. Insert a new spark plug in the socket, be careful, do not drop the plug. Usually plugs come with preset gap and do not need adjustment. If you change gap most likely you will have to get a new spark plug. Install spark plugs. The torque should be around 45 N*m. Connect the wires in the order. Start the engine.