Higher than normal demand will cause more electrons to flow through the load. This will cause the amperage to increase, thereby causing power to increase. A lightning strike on the primary line will cause this condition.
its because of transformers . they work with pulse
Rolling schedule is the time sequence of passes of rolled piece through the mill respecting many constrains and limitations such as:* Limit separating force* Limit rolling torque* Bite angle* Flatness limits* Metallurgical limits* Specific limits(length of delay table, etc.)If all constrains are fulfilled and rolling schedule gives maximum productivity (minimum production time) and the desired product and its specifications are obtained, we can speak about optimum rolling schedule.
power factor correction, and sometimes it is necessary to place capacitors in series with a line to counteract the natural inductance of the line - this allows more power to be transferred through that line.
The same as stealing anything else. With the exception that you're deeling with high voltages and power. To steal electricity, you'd need to modify or create a connection to the electric grid. Depending on the magnitude of power you pull, this can be detectible by the power company immediately, or will be detected given enough time. But the main point is you have to get close to the line, which is a bad idea to say the least, unless you are trained, and have the proper protective equipment. Besides this, you face prosecution when (not if) caught.
A transformer changes the electricity from one voltage to another, which allows a high voltage power line to be converted down to a voltage suitable for home usage.
High tension line so a stronger wire for more electricity to run through
angel halo
Draw a vertical line through the triple point.
A line is normal to another line when it is perpendicular.
Electricity.
Draw a vertical line through the triple point.
The first thing you may want to do would be to find the tangent line to the function. The tangent line is a line that passes through a given point on a function, but does not touch any other point on the function (assuming the function is one to one). Assuming you have the tangent line, the normal line is simply perpendicular to the tangent line- it forms a 90 degree angle with the tangent line. One you have the tangent line and the point which it passes through, you can find the normal line. To obtain the perpendicular line to any function, take the inverse reciprocal of the slope (if your slope was 2, it is now -.5). After that, plug in your (x, y) coordinate, and you can solve for the constant b (assuming there is one). This should give the normal line to a tangent of at a point on a function.
A (Digital Subscriber Line) is a service provided by most Internet Service Providers. You are required to have a phone line for this service. It sends data through the line in different frequencies than voice data. This is a much better choice than Dial-up.
Both are parts of a car. The fuel pump is either situated in the fuel tank or sometimes in the engine of the car and works to pump the fuel from the tank to and around the engine. The fuel line is a thin long pipe witch the fuel does travel through to get from the fuel tank to the engine. the fuel pump sends the fuel through the fuel line.
A power plant produces electricity (electromagnetic energy) which is delivered to a user's home. There is no transformation as electric power is created at the plant, delivered via the power grid and used in the home.
i think that normal is a line segment and normal ray is a line with an arrow head like vector to point in a certain direction....
Distribution lines