Want this question answered?
On the Cummins diesel the crank sensor is located in the side of the block under/behind the starter.On the Cummins diesel the crank sensor is located in the side of the block under/behind the starter.
It is behind the starter in the block.
Cummins (OEM) 12 valve (single wire) oil pressure sensor is located below the injection pump and could be in front of or behind injection pump support bracket. The location was determined by the factory installing the engine. Cummins (OEM) 24 valve (three wire) oil pressure sensor is located below the ECM.
The 2005 Peterbilt M 11 Cummins diesel engine map sensor is located next to the fuel pump. The map sensor should be labeled as such.
On the driver side of the engine behind the fuel filter on the side of the block
a 1993 doesn't have a cam sensor. the crankshaft position sensor is located on the front of the engine directly above the crankshaft pulley
1997 Dodge diesels come with the 12 valve cummins engine. It is fully mechanical and does not have a camshaft position sensor. "Dodge cummins diesel forum" is a good resource for dodge cummins owners.
Engine Oil Rifle Pressure Sensor 1 is located on the left side of the engine block, about 1/3 way to the back.
The water temperature sensor is located on the front of the engine. You will find the sensor behind the thermostat housing.
The 1999 Chevy Suburban camshaft sensor is located on the front of the engine. The camshaft sensor will be behind the front engine cover.
the crank sensor is located just behind the crank shaft pully of the engine.
It sits behind the starter on the drivers side of the engine. You will have to remove the starter in order to see it.