0
You should operate the blower for at least 4 minutes, and then you can feel free to start the engine.
Holden Romaguera
Add your answer:
Earn +20 pts
What should you before starting an inboard gasoline engine?
You should operate the blower for at least 4 minutes, and then you can feel free to start the engine.
What should you do before starting an inboard gasoline engine?
You should operate the blower for at least 4 minutes, and then you can feel free to start the engine.
TP-24 what should you do before stating a inboard gasoline engine?
Operate the blower for at least four minutes
What should you do before starting an inboard gasonline engine?
Operate the blower for at least four minutes
Why should an exhaust blower be operated before starting an inboard engine?
It removes fuel vapors
What should you do before starting an inboard or stern drive engine?
Run the blower. (To get the gas fumes out)
When should the be blower be operated?
On gasoline powered boats, the blower should be operated after refueling and before starting the engine.
When should the blower be operated on boats?
On gasoline powered boats, the blower should be operated after refueling and before starting the engine.
What are recommended maintenance for an inboard boat?
Deteriorated engine and hull zincs should be replaced if corroded
On a boat with an inboard gasoline engine where must the intake duct for the exhaust blower of the powered ventilation system be located?
The intake hose should be located inside the enclosed engine compartment so that gas fumes and exhaust gases can be vented outside the vessel. There is no specific location that I am aware of, they are generally mounted to a bulkhead in the engine compartment where the engine can be accessed without interference.
On gasoline powered boats when should the blower be operated?
Run it a few minutes before you start the engine - It takes the gas fumes out of the engine compartment so that if you have a spark it doesn't ignite.
Which type of the following is recommended maintenance for an inboard boat?
deteriorated engine and hull zincs should be replaced if corroded
