0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How durable is marble countertop?
Marble countertops are durable as long as they are taken care of. Marble is porous so it will scratch easier than a granite countertop. It is also important to use a sealer on your marble countertop. Be careful not to clean marble with abrasives and caustic cleaners because damage will occur.
What should the distance be between the countertop to the bottom of an upper kitchen cabinet?
17-18".
What is the typical cost of a corian countertop?
A corian countertop is manufactured to look like stone, similar to granite. The cost is dependent on size and quality. Base quality is $40 to $50 per square feet, and $60 to $70 per square feet for high quality.
How do you make ping pong ball sink?
you put a hole in it
Proper height for rough sink pipe?
Figure 32 "
Do you have to replace your sink if you replace the countertop?
No, you should keep and reuse the old sink.
How do you fit a sink to the granite?
Granite countertop makers use a template provided with the sink as a guide for the cutout.
Stainless Steel Countertop Install?
form_title=Stainless Steel Countertop Install form_header=11313 How would you describe this countertop project?*= () Install or replace countertop () Repair existing countertop Would this particular project be a part from a larger remodel?*= () Yes () No Select which features you would like for your solid countertop. (Choose all that apply)*= [] Backsplash [] Integral Sink [] Inset designs [] Sink cutouts [] Cooktop cutouts What kind of solid countertop material are you interested in?*= () Solid surfacing (e.g. Corian) () Stainless Steel () Wood (e.g. butcher block) () Concrete () Would like recommendation
What is footed ware?
Pots, etc that have small feet so they don't rest on countertop.
What is the main use of the jigsaw?
It's for cutting curved lines. - My main use for it is cutting sink shapes in new countertop.
What is a vessel sink?
That refers to a sink that stands on top of the countertop rather than being inset as most sinks are. These are usually of coloured glass and shaped in a rounded or bowl shape that looks artistic.
What adhesive can you use for an under mount sink to a granite countertop?
Only use clear 100% silicone, no need to wipe any off underneath.
What is a wall mounting sink with drain boards?
From that description, I would assume it was a kitchen sink mounted to the wall with no cabinet under it and drain boards or shelves on either side attached to the sink.
How to Install a Countertop?
Do-it-Yourself Countertop InstallationInstalling a countertop is not hard to do, even if it may be a big home improvement task. It is achievable by most do-it-yourselfers in a matter of just a few hours with only a few tools and a little know-how. Cost will vary depending on size and quality of material used, but a homeowner should expect to spend approximately $30 per running foot.ToolsOrganize tools before beginning the job. Have them ready at hand and easily accessible throughout the project. The list of necessary tools includes the following:ClampsCordless drillTape measureCircular sawCaulk gun4-in-1 screwdriverBelt sanderDrill bit setDust maskFileHandsawHearing protectionJigsawStraightedgeSafety glassesScribing toolIn addition, a laminate cutter will be needed. Probably no homeowner would ever need to own a laminate cutter, but they can be rented at most home improvement stores. Some materials will also be needed, including siliconized latex caulk, 1-1/2 inch steel angles, 5/8-inch long number 8 screws, masking tape, colored silicone caulk, miter bolts, 1-1/4 inch drywall screws, and an 80-grit sanding belt. All of these items are readily accessible at home improvement stores.Remove the Old CountertopThe first step in this job is to remove the old countertop. The countertop is connected with screws, and can simply be unscrewed for removal. Along with the old countertop, it will be necessary to remove the sink, stovetop, and any other fixtures or drop-in accessories attached to it. Remove the sink plumbing by simply unscrewing the connectors, and then remove the sink by unscrewing the hanger screws from the underside. If a stove is mounted on the countertops, it can also be removed by unscrewing mounting screws and disconnecting the gas or electrical connection. Pay close attention to the existing holes used by the old countertop and stove, as these can be reused in the new installation.Put the New Countertop in PlaceOnce the old countertop has been removed, the new countertop will be installed in its place. The entire job essentially boils down to just these two steps, even if there are many intermediate steps involved. A new countertop will come from the dealer in sections, which allow for more convenient handling. The dealer will probably also install fasteners which will simplify final attachment and ensure close fitting. Some parts of the countertop can be pre-assembled by the shop to further simplify installation.Before installing the new countertop, make sure that the underlying cabinets remain level. Cabinets can shift and settle over time, and where this occurs, a countertop can warp or even crack. Put the new countertop into place, and check to make sure that it is level from end to end and front to back. Screw the new countertop into the mounting brackets where the old countertop was connected. The new countertop will simply replace the old, and will sit in the same location. It will be necessary to cut a hole for the sink in the new countertop. For this step, a jigsaw will be used. Mark the cut out line with a utility knife to prevent chipping. The sink can now be inserted and reconnected to water. The stove can be inserted in the same way, cutting a hole through the new countertop and connecting the stove to its gas or electrical connection.The Job is Done!With that, the new countertop will be in place and fully usable. Double check connections and level for accuracy. Also double check sink and stove functioning. In all, this job can be completed in less than a day. A homeowner who completes the job him or herself will save hundreds of dollars. Of course, if the homeowner is unable to complete one or more steps, or if after installation the countertop remains unlevel or an accessory fails to work, a professional may be needed.
Laminate Countertops Installation?
form_title=Laminate Countertops Installation form_header=9523 Would this particular project be a part from a larger remodel?*= () Yes () No Pick which features you want for your laminate countertop.*= [] Backsplash [] Sink cutouts [] Cooktop cutouts [] Custom shape [] Radius counter Would you like to know more about the project's green alternatives ?*= () Yes () No How would you describe this countertop project?*= () Install or replace countertop () Repair existing countertop
Stone or Marble Slab Countertop Installation?
form_title=Stone or Marble Slab Countertop Installation form_header=11453 How would you describe this countertop project?*= () Install or replace countertop () Repair existing countertop Would this particular project be a part from a larger remodel?*= () Yes () No Would you like to know more about the project's green alternatives ?*= () Yes () No Please select which features you would like for your countertop:*= [] Backsplash [] Cooktop cutouts [] Custom shape [] Radius corners [] New sink Specify which kinds of solid stone you were looking at.*= [] "Granite [] Marble [] Quartz (Silestone, Zodiaq or CaesarStone) [] Want recommendation"
How do you install drain baskets into new kitchen sink?
If a template is provided make sure that you check the template against the sink for a proper fit. Set the template on the countertop making sure that it is far enough forward that you will be able to fit the faucet and back splash material behind it. Trace around the template marking the cutout for the sink. If a template isn't available turn the sink upside down and use it as a template. Do not use this line as a cut out mark. Instead measure in from the rim of the undermount sink to where you want the edge of the sink opening to start. Determine whether you want the countertop to overhang the side of the sink bowl like pictured or if you want the countertop to be cut back a small amount so that you see some of the rim of the sink. Using that measurement draw a new line inside your first line. The new line will become your cutout line. Cut out your sink hole now.After cutting out the sink hole position the sink on the underside of the countertop in its desired position. Mark the location of all of the anchors. We suggest at least six clips for smaller sinks and at least eight clips for larger sinks (more may be necessary for oversized or heavy sinks). Drill a hole at each location to accept the female inserts and clean the holes of all dust and debris. Using a two part epoxy (not included) glue the inserts into the holes. Allow epoxy to cure according to the manufactures directions.Apply clear silicone sealer (not included) to the top side of the sink rim and press the sink rim to the underside of the countertop. Use the provided clips and screws to secure the sink in place. Wipe away excess caulk and allow sealant to fully cure before loading the sink.
