0
0.31 inch
ANS 2 - or, in fractions, 5/16 ths
Wiki User
∙ 11y ago
Wiki User
∙ 11y agoYou need a 17/64 drill bit for a clearance fit of an 8-24 or 8-32 screw. If that was NOT the screw you meant, then next time please give the proper description.
Wiki User
∙ 11y agoA 5 mm drill bit is equal to 7/64, or for all practical purposes, 3/16 inch.
Wiki User
∙ 11y agoI use a 5/32 drill bit for an 8 gauge screw.
Wiki User
∙ 11y ago12 mm is almost exactly 15/32.
Wiki User
∙ 11y agoA 1/4 inch drillbit.
Add your answer:
Earn +20 pts
What drill bit size for a 832 screw?
That size is 8-32. The drill bit for a clearance hole is 11/64, or a #17 drill bit.
What size drill bit for 5-16 lag screw?
I use 1/4 drill bit for a 5/16 lag screw in most materials.
What drill bit to use with different size screws?
If they are self tapping screws, the drill bit is as thick as the solid barrel of the screw. If you want the screw to go through easily to have a nut on the other side, then the drill bit is slightly larger than thread size.
What size drill bit should you use for a hole to be tapped for a .25 x 20 screw?
I use a 3/16 drill bit for that.
What size drill bit is 5.105 mm?
5.105 is 0.201 inch , or #7 on drill gauge. Both are common drill bits.
What size pilot hole do you drill before using the countersink bit in stainless steel?
I drill a pilot hole the size of the 'barrel' of the screw. -I always use a combination drill bit for sinking screwheads. The first part of the bit is the diameter of the 'barrel' of the screw and the step, one inch higher is the size of that screw's head. (The barrel is the diameter inside threads) -I have a set of these drill bits for #6, #8, and #10 screws and they are great.
What makes a drill bit a screw?
Drill bits and screws are not the same and cannot be converted. vido produces drill bits with high quality, exported overseas and loved by the public. If you want to buy a drill, you can go to VIDO's official website to check.
What is a combination drill bit?
It's one that has a point of a basic screw size, and a bit further up it widens to the size of that screws head, so you can make a countersink hole with the same drill.
What size screw can you use with 8.5 cm drill bit?
That's a pretty big drill bit, -it drills a hole just a tad larger than 3 3/8 inch wide.
What wood drill bit size would I use for one quarter inch diameter lag screw into 2 pieces 1 AND HALF inch width wood board?
A 3/16 drill bit.
How do you remove a bored out screw?
Use appropriate sized drill bit to drill completely through the stuck screw and retap the hole if new screw is necessary.
12.75mm drill bit equal to what size in drill bit in inches?
.50196850"
