0
A 4 mm drill bit is equivalent to 5/32 inch.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
What drill bit size for a 832 screw?
That size is 8-32. The drill bit for a clearance hole is 11/64, or a #17 drill bit.
12.75mm drill bit equal to what size in drill bit in inches?
.50196850"
What size drill bit for a 6mm hole?
Surprisingly enough- a 6 mm drill bit, or if you don't have one,1/4 drill bit will do.
Do drill bits have a universal size?
Drill bits are not universal. You choose the size of the drill bit according to the size of hole you like to make.
What makes a drill bit a screw?
Drill bits and screws are not the same and cannot be converted. vido produces drill bits with high quality, exported overseas and loved by the public. If you want to buy a drill, you can go to VIDO's official website to check.
What size drill bit do you need for a crab burner?
accoring to the size.
What size drill bit for a one quarter inch bolt?
For a clearance hole you need a 9/64 drill bit.
What mm size rubber grommet for a half inch drill bit?
.50 drill bit = 8mm rubber grommet
How can you tell the differences in drill bits?
The drill bit size is always stamped on the shaft.
What size is an O drill bit?
An 'O' drill bit is a decimal size, 0.3160 inch, which is between 5/16 and 21/64 on the fractional inch scale.
What size drill bit is equivalent to a size r?
The 'R' drill is 0.339 inch, which converts to just a tiny bit less than 11/32 of an inch
What drill bit is 054?
You are not expressing the size correctly. -There is NO 054. -If you mean 0.054 of an inch, then the nearest drill size is a #54 drill, which is 1.397 mm thick.
