Want this question answered?
17mm spanner
Screw a proper size end cap from your local hardware store onto the pipe and use thread sealer. Go to your local hardware store and purchase a cap that fits that size line. Use a sealant on the threads.
Pipe bore is the actual minimum inside diameter of a pipe, which is not necessarily the nominal pipe size.
Stepping down the size of a pipe on irrigation can certainly bring up the pressure. Generally, the larger the pipe, the lower the pressure. It is best to use at least a 3/4" pipe in size in terms of irrigation.
Nominal bore which is designation for pipe size.
17mm spanner
any kind of standard size compression or clamp
How to calculate spanner size regarding bolts and nuts
The effective diameter of the bolt defines the size of the bolt head. Hence the size of the spanner or wrench that fits the bolt. There are certain exceptions but these are usually specialist applications.
Its a 13mm spanner that you require.
A spanner is another word for box-end wrench. So, a 14 spanner would be a metric size 14 box-end wrench.
1.5d+ 1 or 2, where d is the bolt size
compression ratio=uncompressed image size/compressed size
the answer is yes and no because the king only fits the king size. the quenn mattress size only fits the queen size fits and the small well it only fits the small.
its 8mm square
what size spanner
It depends on the size of PVC. For smaller PVC you can buy fittings that glue onto the PVC and allow a thread x barb fitting to be installed. For larger pipe you should get a brass compression fitting that clamps down on the PVC and adapts to a thread x barb fitting.