10 mm2 cross section should be sufficient (#6 wire?)
10 kw or 10,000 watts divided by 240 volts equals 41.6666 amps. 8 gauge is borderline so you will need 6 gauge wire to be safe.
A 10 mm cable is most commonly used for a 500 KVA transformer, 240 volt, 3 phrase. The size of the wire that is used in a transformer is based on the voltage.
The question is irrelevant if you don't include the amperage.
Yes <<>> In North America, a three wire 120/240 volt system uses a neutral wire. For 240 volts two "hot" wires are used with no neutral.
A 1/0 aluminum conductor will limit the voltage drop to 3% or less when supplying 30 amps for 500 feet on a 240 volt system.
AWG #3 copper.
4 copper
A 10 mm cable is most commonly used for a 500 KVA transformer, 240 volt, 3 phrase. The size of the wire that is used in a transformer is based on the voltage.
The question is irrelevant if you don't include the amperage.
Yes 220 & 240 are considered the same.
Yes <<>> In North America, a three wire 120/240 volt system uses a neutral wire. For 240 volts two "hot" wires are used with no neutral.
no
The type and size of a wire for a 240 volt air conditioner will depend on the amperage the unit draws.
Answer for USA, Canada and countries running a 60 Hz supply service.240 volt two wire circuits loads do not need a neutral to operate. A three wire 240 volt circuit that needs a neutral, will have a neutral the same size as the current carrying conductors. In this case a #10.
A #10 copper conductor will limit the voltage drop to 3% or less when supplying 21 amps for 150 feet on a 240 volt system.
It could if you don't get the terminals and motor wires on the correct terminals.
you must run the proper size wire based on the ampacity needed, wire must have four conductors including the gound
A 1/0 aluminum conductor will limit the voltage drop to 3% or less when supplying 30 amps for 500 feet on a 240 volt system.