Tile is best placed onto cement or cement boards. With that stated Custom Building Products, one the biggest makers of tile thinsets and cement boards says it is allowable, although not preferred to install on CDX plywood but your total floor must be 1 1/4" with all subfloors. Back splashes in areas that are not exposed to steam or water can install onto plaster walls.
Yes, but you should you use an adhesive that is ductile
Yes
If it sits over a cement floor, then no. If it is a nailed down floor, then you can, but you still have to install a cement board.
it could be a number of things, premixed thinset, to much flex in the substrate, mixed thinset too thin, didnt seal grout "if in shower" where is the tile installed, what did you use to install it and how did you install it?
If you are positive that it is asphalt I would not suggest adhering tile directly to the asphalt. If removal of asphalt is not an option I would install a subfloor and use thinset mortar to adhere the tile. Another option (probably the better option) would be to pour a concrete mix over the asphalt. Than use thinset to install the tile. The concrete will incapsolate the asphalt. Asphalt more than likely has oils in it and can be a hazard.
Get a tile cutter and remove the tile. Strip all the tile off and make sure the underneath surface is clean. Then u install a protective foam pad layer and install the carpet above it.
Though people do tile over tile, it's really not recommended. The underlying surface can make or break a tile installation. Preparing that surface is the most important step. So I'd remove the old tile, prepare the surface properly and then install your new tile. This will insure the long lasting beauty of your fireplace tile.
To install tile over acrylic paint, the paint must be sanded so that the surface is rough instead of smooth. Then the paint must be wiped down so that there is no paint dust remaining, after which the mastik for mounting the tile can be applied.
yes. Clean tile with a commercial degreaser. scar the surface with a hand sander. mop with clean water, and let dry. Install with fortified thinset.
It is best to remove the vinyl tile. If it is not on cement and is on wood you can install cement backer board. Be sure to put thin set under the board. If you spend the money and time to install ceramic tile and the vinyl tile comes loose all that $ is down the drain What is the best tile cement to use and this cement tile can be installed on vinyl tile and install ceramic tile on it
I would not recommend it. It will not bond properly. You will have to install an appropriate sub-floor, then install the tile on that
You should NEVER install tile over laminate. Pull up the laminate (which is very easy) and install the appropriate subfloor, then install tile on that
form_title= Bathroom Floor Tile form_header= Install new bathroom tile in your home. What color tile would you like to install?*= _ [50] Do you need to remove old tile?*= () Yes () No Do you want to install under floor heating? *= () Yes () No What is the square footage of your bathroom?*= _ [50]
form_title= Shower Tile form_header= Redo your shower tile and create a whole new bathroom look! Do you have tile that needs toe removed?*= () Yes () No () Not Sure What color tile do you what installed?*= _ [50] What are the dimensions of your bathroom?*= _ [50]
Not really...for tile to be properly set it must be on a hard surface. A carpeted surface will not provide the hard surface needed for tile to properly bond.
A regular octagon cannot tile a flat surface, it needs squares as fillers. An irregular octagon can tile a flat surface alone.
form_title= Porcelain Tile form_header= Install beautiful porcelain tile in your home! Where do you want he tile installed?*= _ [50] What are the dimensions of the room?*= _ [50] What size do you want the tile?*= _ [50]