0
The boiling point of water at 100 psi is 328 degrees Fahrenheit. This converts to a value of 164 degrees Celsius.
Wiki User
∙ 9y ago
Wiki User
∙ 12y agoThe boiling point of liquids depends on the pressure; the relation is of inverse proportionality.
For calculation see the link below.
Wiki User
∙ 11y agoThe boiling point of water at 16psi is 102 oC or 216 oC. (Engineering Tool Box)
Wiki User
∙ 12y agoThe boiling point of water at 100psi is 164 degrees Celsius.
Wiki User
∙ 14y agoabout 110oC - 120oC
Anonymous
252 deg F at 16 psig (psi is not clear)
Add your answer:
Earn +20 pts
What is the boiling point of ethane at 175 psi?
247,18 Kelvin
Is the boiling point of water always the same?
NO!!!! It depends on the gas pressure above the water's surface. The fact that it is given at 100 oC is for STP. If you try to boil water at the top of Mount Everest (29,000 ft) you will find it boils at a much lower temperature.
What is the reid vapor pressure of LPG?
100 + psi
What is the boiling point of water at STP?
Water does not boil at STP. STP stands for standard temperature and pressure. You've got to either increase the temperature or decrease the pressure. Most likely you want to know what the boiling point of water is at standard pressure. This is complicated somewhat by the fact that STP is not as simple as it used to be and is now defined by IUPAC as 100 kPa but by NIST as 1 ATM (101.325 kPa). Using NIST standard pressure, the boiling point of water is 373.15 K; using IUPAC's value, it's 372.78 K (approximately... I couldn't find exactly 100 kPa in my vapor pressure tables, so I had to interpolate a little; that last digit may be off slightly). Somewhat less likely is that you want to know what pressure is required to make water boil at standard temperature. Again, two competing standards; IUPAC's is 273.15 K and NIST's is 293.15 K. IUPAC's value leads to a pressure of 4.579 Torr, which is 0.610 kPa; NIST's value yields a pressure of 17.535 Torr or 2.34 kPa. All values are straight from vapor pressure tables in the CRC Handbook of Chemistry and Physics (60th Ed.) modulo a units conversion, except for the one for IUPAC standard pressure which I had to interpolate as noted above.
How many bar is in a kPa?
101.3 kPa=100 Pascals 101.3 kPa=1.00atm=760 mmHg=25.4 in Hg=14.7psi=100 Pa
What is the boiling point of water at 100 psi gage?
See the Related Questions for the boiling point of water at a variety of pressures.
What is the boiling point of water at 6500 psi?
134
What is the boiling point of ethane at 175 psi?
247,18 Kelvin
A 10 psi radiator cap will raise the boiling point of coolant how degrees Fahrenheit?
the boiling point of the water will raise 3 deg. frht. for every pound of pressure the cap is rated for. a 10lb. cap will raise the boiling temp to 242deg. frht.
Why the temperature inside an autoclave can be higher than 100 Celsius?
The temperature inside can be higher than the boiling point of water due to pressure; it is all relative. For instance at sea level water boils at 100 C / 212 F; but on top of Mount Everest it boils at 69C / 156 F. An autoclave runs at 30~35 PSI which translates to water boiling at 135C / 280F to 160C / 320F. The higher the pressure the higher the temperature.
How much will the boiling point of coolant be raised going from a 15 psi cap to a 17 psi cap?
about 5 degabout 5 deg
What temperature is superheated water?
Critical point is the state of water at which no latent heat is required to convert water into superheated steam. Above this point water directly converted into superheated steam. theoretically critical point of water is 221.4 bar and 374.2 deg C .
How can you get water to boil at 170 degrees c?
Water at ambient atmospheric pressure boils at 100C. One way of raising the boiling point is to raise the surrounding pressure. If you raise the pressure surrounding the water to about 93 psi above atmospheric, it will boil at about 170C. Do not try this at home! Boiling water at this pressure is extremely dangerous and can severely burn you.
Melting point and boiling point of Garnet?
what is the melting point of spessartite garnets under normal atmospheric pressure, and what would be the melting point and the fusion point of spessartite under 2000 psi.
What does head pressure mean in plumbing?
the weight of the water above. water in a 1" pipe 100' tall is 43 psi @ base of pipe. water in a 50' tank 100' tall is 43 psi @ base of tank. h x .434 = psi
What is boiling temperature of water under 40 psi at sea level?
32oF
At what pressure does water boil?
Although we usually see water boiling at close to 760 mm Hg (14.7 psi) and 100oC it will boil at almost any appropriate combination of temperature and pressure up to the critical point of water at 373,94oC and 22,060 kPa.
