0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
HOW A GRANDFATHER CLOCK WORKS?
A grandfather clock is a freestanding floor clock with a pendulum which is driven by weights. William Clement, an English clockmaker, developed this type of clock in 1670. They are sometimes referred to as longcase and striking clocks. A modern longcase clock is referred to as a grandfather clock and has eight-day movements which are different from the earlier longcase clocks. Traditionally, there were two types of longcase clocks, an eight-day one that had to be wound once a week and a thirty hour clock which had to be wound once a day. The modern longcase clock is usually driven by weights suspended by a cable wrapped around a pulley and is wound by inserting a crank key into a hole of the face of the clock and turning it. There are chain-driven ones that are wound by pulling the chain on the weights until the weights reach the top, right under the face of the clock. The left weight of a modern grandfather clock, which contains three weights, controls the striking on the hour, the middle weight controls the pendulum and keeps the time correct, and the right weight controls the quarter-hour chiming sequences. For the pendulum to swing properly, the clocks must be absolutely level on the floor. Westminster Quarters are installed in most modern grandfather clocks but some offer Whittington Chimes or Michael’s Chimes. One-fourth of the chime sequence sounds on 15 minutes past the hour, one-half of the chime sequence sounds on 30 minutes past the hour, three-fourths of the chime sequence sounds on quarter past the hour, and the remaining chime sequence sounds on the hour. Grandfather clocks got their name in 1876 when a song was written by H.C. Work called My Grandfather’s Clock. This was written in remembrance of two brothers who worked as managers at a hotel in England. When the first brother died, the clock began to lose time. When the other brother died, the clock quit working altogether. The longcase clocks were routinely called grandfather clocks from that time on.
What is the difference between reciprocating and oscillating?
One is a line going back and forth, and the other is like a grandfather clock
What is the difference between Oscillating and Reciprocating motion?
One is a line going back and forth, and the other is like a grandfather clock
A pendulum has a length L and time period T for completing one oscillation.?
Yes, you can label it that way.
The period of a wave is the?
The time taken by one complete oscillation to cross a fixed point is called the period of a wave.
What is the time period of the minute hand on a clock?
The time period of a nimute hand on the clock is one minute since it takes a minute for it to complete one oscillation, ie., one complete cycle of the clock.
What are four sentences for the word clock?
Time to clock out of work.We have a huge grandfather clock in the hallway.We need a new alarm clock.He prefers to have an analogue clock rather than a digital one.
Where can you purchase a grandfather clock?
One may look to a custom furniture design store to purchase a grandfather clock. Other stores such as Bed, Bath and Beyond, Big Lots, Walmarts and Sears all also should be looked into when purchasing a grandfather clock.
What is thte Accurate way to measure the time for one oscillation of the pendulum?
We could reduce random errors by taking the average of the time taken for one oscillation.
What is time taken by an object to complete one oscillation called?
time period
What did one grandfather clock say to the other as it chimed?
'Our hour is up.' The answer contains a homophone.
Was is the value of a Howard Miller Grandfather clock serial number 616497 Excellent condition?
still looking for the value of a Howard Miller Grandfather clock serial number 616497 if any one can help me Thanks.
Where can one purchase an antique grandfather clock?
An antique grandfather clock will most likely turn up in the first antique store you visit. Although if there's no antique store in your neighborhood, you will also be able to find them online (where u might also want to use terms like Longcase Clock and Floor Clock).
Grandfather clock on the sims 3?
No. You might be able to buy one on the Sims Store, though.
Value of 61st Anniversary Howard Miller Grandfather Clock?
what is the value of a horward miller 61 st annivery grandfather clock
How do you measure one second?
With a stop watch or a clock. If you're asking how do we determine what a second is (In the SI- International system of units), then that is determined by the oscillation of a Cesium Atom's Microwave. No matter what the conditions, the cesium atom's full oscillation will always equal one second. No matter where in the world. Really neat phenomenon.
HOW A GRANDFATHER CLOCK WORKS?
A grandfather clock is a freestanding floor clock with a pendulum which is driven by weights. William Clement, an English clockmaker, developed this type of clock in 1670. They are sometimes referred to as longcase and striking clocks. A modern longcase clock is referred to as a grandfather clock and has eight-day movements which are different from the earlier longcase clocks. Traditionally, there were two types of longcase clocks, an eight-day one that had to be wound once a week and a thirty hour clock which had to be wound once a day. The modern longcase clock is usually driven by weights suspended by a cable wrapped around a pulley and is wound by inserting a crank key into a hole of the face of the clock and turning it. There are chain-driven ones that are wound by pulling the chain on the weights until the weights reach the top, right under the face of the clock. The left weight of a modern grandfather clock, which contains three weights, controls the striking on the hour, the middle weight controls the pendulum and keeps the time correct, and the right weight controls the quarter-hour chiming sequences. For the pendulum to swing properly, the clocks must be absolutely level on the floor. Westminster Quarters are installed in most modern grandfather clocks but some offer Whittington Chimes or Michael’s Chimes. One-fourth of the chime sequence sounds on 15 minutes past the hour, one-half of the chime sequence sounds on 30 minutes past the hour, three-fourths of the chime sequence sounds on quarter past the hour, and the remaining chime sequence sounds on the hour. Grandfather clocks got their name in 1876 when a song was written by H.C. Work called My Grandfather’s Clock. This was written in remembrance of two brothers who worked as managers at a hotel in England. When the first brother died, the clock began to lose time. When the other brother died, the clock quit working altogether. The longcase clocks were routinely called grandfather clocks from that time on.
