0
the best and most safest tools are line spanners
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What is a line disconnect tool T90T-9550-S?
a special disconect tool for replacing fuel filters
How do you disconnect the automatic transmission cooling lines from a 1995 Dodge Dakota radiator?
there is a tool made to slip around the line rite at the connectionto the radiator and you push the tool in and pull the line. i believe its called a compression line remover or a fuel line remover. most auto parts stores have them.
How do you connect transmission cooler line to radiator on dodge ram 1500 do i need to get a new line were it is crimped?
you will need a disconnect tool for fuel/ac. not sure exactly on the size. with the tool you'll push in at the bigger end of the tube (with the tool on the smaller tube) and with a little wiggling it will break free
How do you detach transmission hoses from radiator of 1999 dodge ram truck?
With a release tool.
What is a wiper removal tool for a VW Jetta?
It is a small plastic tool that can be found beside the radiator return hose, to the left of the blinker coolant line.
I need to disconnect the transmission line from the bottom of my radaitor on my Dakota PU. I have a sissor like disconnect tool but can't seem to figure out how to use it?
the line is a quick disconnect to operate your tool is to simply open it up place it on the line with the stems facing the connector and push in on the tool once the tool is fully seated keep pressure on the tool while pulling on the line to remove it. good luck
How do you remove quick disconnect transmission line on a jeep?
Easy use a quick disconnect tool or a small screwdriver
How do you remove a hydraulic clutch line from transmission?
Coming from the side of your transmission, is your slave clyinder. On the slave slave clyinder, there are two rods that are coming out. One should have an adapter which is connected to your clutch line. There is a tool that you can get from a place like Autozone that you can borrow. That tool has prongs that you will put in between the white collar and the backing. With the tool in place, push the collar forward into the connector on the slave clyinder and the line should just pop out.
How do you unhook clutch hydraulic line for ford ranger from transmission?
You will need the Ford Hydraulic Clutch Quick Disconnect Tool.
How do you replace the fuel filter on a 1997 Pontiac Grand Am?
you need a disconect tool for one side and 2 wrenches for the other
How do you disconnect the hydraulic line from your transmission?
they make a tool for it but where the line goes in trans there is a white band plastic push in band with screw driver all the way around line and pull it should come off
How do you remove the transmission cooler lines from the transmission on a 1992 Jeep Cherokee Loredo?
The bottom fitting is a quick connect fitting. You usually use a special tool to release this fitting. Some auto parts stores will lend you the necessary tool for free. The top line will be a flare fitting, which will require the proper sized end wrench or line wrench to remove.
