cat 5 Ethernet cable
rollover cable
router>enable router#configure terminal router(config)#line vty 0 4 router(config-line)#password cisco router(config-line)#login to configure router with telnet you must set up password or secret for privilieged mode.
On a cisco router you would go into privilege-exec mode (enable) and then into "configure terminal" mode. From there you can use the router rip command.
show version
CDP Cisco Discovery protocol identifies the IP addresss of neighbor router in a corporate network.
crossover cable
To connect to a cisco 1800 series router, you need either a network connection that goes to the router, and then you would configure the router to allow telnet or you would need a console cable, also called a rollover or cisco cable and physical access to the device.
It's a cable used to connect from a Cisco router's DB60 serial port to a telecommunication company's equipment which provides you with a data link.
It would be possible to obtain a Cisco router cable from various different stores and outlet stores that sell cables and other equipment for internet connections such as the Cisco router cable in particular.
how do i get my laptop to pickup my cisco wireless router while using ubuntu. my laptop will not show wireless connect
Should you start a Cisco router sans config (as is the case when you first purchase it), then it will not do anything but power on - yet. You must attach a cable to the console port of the router on one end, and the serial port of your computer at the other. This can also be done using a rollover cable to connect the router's console port to your computer's ethernet port. Once connected, you can use HyperTerminal, Cutecom, or another serial communication terminal program to see the console input.output from the router. It will ask you if you would like to enter the initial configuration script. Type yes and work from there!
Rollover cable (also known as Cisco console cableor a Yost cable) is a type of null-modem cable that is often used to connect a computer terminal to a router's console port
A rollover cable is used in a networking environment where a router/switch is to be configured from a computer. One end is wired one way but on the other it is reversed. You would typically use one end into a serial port on a PC and the other into the console port of the switch/router. It is common within cisco configurations. Hope I helped
There are several things that a Cisco Router 2811 can do for you, including you connect to the internet. It has features such as: security, voice support, 2 integrated Ethernet ports, enhanced network module slots and enhanced investment protection.
If you want to shutdown a port on a Cisco 2960 Catalyst Switch you will need to connect to the router (either SSH, TelNet or connect using the Console cable) and enter the interface you want to shutdown. You will then need to enter the shutdowncommand. An example is given below for Fast Ethernet 0/2Router> enableRouter# configure terminalRouter(config)# interface fa0/2Router(config-if)# shutdown
It routes things... lol If you have a cable internet connection for instance, the cable company gives you a cable modem that connects to the cable jack in the wall. To split this signal amongst multiple computers you need a router. The router plugs right into the modem and the computers plug into the router. The router then will devide the internet signal between the computers.
Cisco 1811 is a piece of computer equipment. Cisco 1811 is a router that are predominantly focused on ethernet access for laptops and desk top computers.