Use straight 30wt oil with outside temperature of 40 degrees or more, or 10w30 multi- viscosity for the whole temperature range. However engine will consume more oil if 10w30 is used but is easier to start engine if temperature is below 40 degrees
It is a 2-cycle 4HP Briggs motor.
If it has a Briggs and Stratton engine you need SAE30. If it is a Kohler it uses 10W30.
4
SAE 10w30 Synthetic.
The coil is under the cowling on top of the motor where the flywheel is.
You should always have 20 fluid ounces of oil in a Briggs and Stratton 5.5 HP lawn mower. This equals out to roughly 1.6 quarts.
One can purchase parts for a used Briggs and Stratton lawn mower from the following sources: Mower Graveyard, eBay, Briggs and Stratton, Zangler Repair, Lowes, Discount Online Parts.
which 42" Craftsman riding mower is made by Huskvarna
Where is the location of the idle screw on the Briggs and Stratton 6.0 engine mulcher mower?
0.030 is the gap for briggs and stratton 4.5 hp mower
official site for Briggs and Stratton Spark Plugs is: http://www.briggsandstratton.com/maint_repair/routine_maintenance/choosing_spark_plugs/ The proper spark plug will depend on the type of 6.5 HP motor that you have. Briggs and Stratton made several different ones and the best way to get the proper plug will be to call an authorized Briggs and Stratton repair shop with the mower make and model numbers.
how much would it cost to bore out a 12 hp briggs and stratton riding mower motor