answersLogoWhite

0


Best Answer

Tools used in the gold rush included utensils for digging and carrying gold-bearing soil. They included basic equipment for survival, for constructing some sort of shelter, or simple protection, such as:

  • gold pan
  • shovel
  • pick
  • rope
  • saw
  • axe
  • pick
  • wheelbarrow
  • knife
  • gun
User Avatar

Wiki User

12y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What were two tools used to collect gold?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about General History

What are two most commonly used tools for planning a programs logic?

Flowcharts and pseudocode


What kind of war tools helped defeat Egypt?

They used their superior two-wheeled chariots and their iron weapons


What tools did the gold rush miners use?

Diggers in the gold rushes (Australian and American) used the following equipment and tools to find gold:Panning involved the use of a solid pan. An amount of potentially gold-bearing dirt was placed in the pan with some water, and gently swished and shaken around, a process which would bring the smaller particles of gold to the surface.Cradling involved a wooden box loosely resembling a cradle. The cradle was used for sifting through larger amounts of sediment to find gold, and was popular from the early times of the goldrushes. It required at least two men to work. The cradle had a grate and a sieve. The dirt and sediment to be sifted through was emptied onto the grate in the cradle. The cradle was rocked quickly back and forth (in the action of a cradle) while water was poured over the sediment to help work it through. The grate stopped coarser stones from going through, while the fine material was sifted out the other end. The gold would be left behind for easy collection.Sieves were also popular. They were like a pan but with a mesh base through which the water would drain, to help separate gold from similar sized particles.Windlass was one of the slower methods of mining for gold. Two people were required to operate it, one at the surface and one in the mine shaft. The person in the shaft filled a bucket with potential gold-bearing soil and rocks, and the person on the surface operated the windlass to wind up the bucket. The contents of the bucket were then sorted through, perhaps in a cradle or a pan.Long Toms were like cradles, but they used paddlewheels to make sure there was a continuous flow of water. This method was used in America, but rare in Australia.Other tools included utensils for digging and carrying gold-bearing soil. They included basic equipment for survival, for constructing some sort of shelter, or simple protection. These included: shovelpickropesawaxepickwheelbarrowknifegun


What to put in a gold rush display?

A gold rush display would include examples of tools and equipment used during the goldrush. Such items would include a goldpan, a gold-sifting cradle, windlass, pick, short-handled shovel and tin bucket. One could also include a simple tent - usually just a piece of canvas slung over a pole or tied between two trees. Outside the tent would be a campfire with a billy and perhaps a stewing pot.


What Gear did miners use in the gold rush?

Diggers in the gold rushes (Australian and American) used the following equipment and methods to find gold:Panning involved the use of a solid pan. An amount of potentially gold-bearing dirt was placed in the pan with some water, and gently swished and shaken around, a process which would bring the smaller particles of gold to the surface.Cradling involved a wooden box loosely resembling a cradle. The cradle was used for sifting through larger amounts of sediment to find gold, and was popular from the early times of the goldrushes. It required at least two men to work. The cradle had a grate and a sieve. The dirt and sediment to be sifted through was emptied onto the grate in the cradle. The cradle was rocked quickly back and forth (in the action of a cradle) while water was poured over the sediment to help work it through. The grate stopped coarser stones from going through, while the fine material was sifted out the other end. The gold would be left behind for easy collection.Sieves were also popular. They were like a pan but with a mesh base through which the water would drain, to help separate gold from similar sized particles.Windlass was one of the slower methods of mining for gold. Two people were required to operate it, one at the surface and one in the mine shaft. The person in the shaft filled a bucket with potential gold-bearing soil and rocks, and the person on the surface operated the windlass to wind up the bucket. The contents of the bucket were then sorted through, perhaps in a cradle or a pan.Long Toms were like cradles, but they used paddlewheels to make sure there was a continuous flow of water. This method was used in America, but rare in Australia.Other tools included utensils for digging and carrying gold-bearing soil. They included basic equipment for survival, for constructing some sort of shelter, or simple protection. These included:shovelpickropesawaxepickwheelbarrowknifegunIf you found a large gold mine, the tools and equipment above are not enough. You should break the rock or stone, and separate the gold from others. The tools and equipment are crusher, ball mill, flotation cell and others.

Related questions

What were two tools used to collect gold of the forty niners?

Diggers in the gold rush used the following equipment to find gold:Panning involved the use of a solid pan.Cradling involved a wooden box loosely resembling a cradle, which would separate the gold from the soil.Picks were used to fossick among rocks and mullock heaps.Sieves were like a pan but with a mesh base through which the water would drain, to help separate gold from similar sized particles.Windlass helped in shaft-mining.A poppet head and winch was a larger version of the windlass. Poppet heads stood over deep mining shafts.Stamper batteries were large steam-driven machines, which were used to crush the quartz in order to extract gold.Other tools included utensils for digging and carrying gold-bearing soil. They included basic equipment for survival, for constructing some sort of shelter, or simple protection. These included:shovelpickropesawaxepickwheelbarrowknifegunknifescalesbucket


What is one of the two elements that start with an A that are used in jewelry?

Ag (silver) and Au (gold) are the two elements that start with an A that are used in jewelry.


What two tools can be used for sharpening knives?

Grindstone and file.


What two tools are used to take blood pressure readings?

Sphygmomanometer and Stethescopeare used..


What tool do a veterinarian used?

The tools that the veterinarians use can be divided into two the diagnostic tools and the digital tools. Examples of these tools include the ultrasound and radiographic equipment, the microscopes and the Stethoscopes.


What two important trade goods did kush export to Egypt?

iron and steel


What were the two tools teacher used to teach reading and writing?

oiyuhjg


What were two tools teachers used to teach reading and writing?

oiyuhjg


Can alligator clips be used with a screwdriver?

The tools are different in type and are used for two different applications.


What are the two main systems used to measure the purity of gold?

name the two main numbering systemsused to measure the purity of gold


How is silver and gold separated?

Two methods--electrolysis and parting--are used to separate silver and gold in silver-gold bullion


How can tools of molecular biology be used to compare the DNA of two individuals?

this is lame