It would act as a solvent & start dissolving the top layers.
Fossil fuel is kerosene. Of kerosene oil condensate.
When water and kerosene are mixed kerosene will float on top.
the source of kerosene is hydrocarbon
kerosene is denser
kerosene
Retouch varnish
Stains are meant to penetrate the pores of the wood. The varnish seals the pores of the wood. Stain applied afterword just does not work well.
You will die.
varnish and lacquer are used to protect them frm outer environment like moisture, acid,etc. so that the matreial over which it z applied stay for longer...
the answer is that it is an additive
lacquer (which is sometimes called varnish)
Woodstain is applied with a rag or brush and then varnished with clear varnish, or tinted varnish can be used, available in different timber colours.
Nail varnish is the coloured polish, and that goes on first. The french polish is just a see-through layer that is a strengthener/hardener to make the coloured varnish last longer and that goes on top after you have applied 1 to 2 coats of the coloured nail polish.
Yes. A varnish made with one pound of sulphur boiled for half an hour in an iron vessel is a perfect. It should be applied with a brush, while warm.
Nail polish (nail varnish) is a lacquer applied to toenails or fingernails for appearance, but also as nail protection.
Yes, acrylic paint should work when applied to Lego. It is recommended that you apply a varnish afterwards.
Glaze gives depth and glossiness to a painting. It is a clear, thin layer of varnish applied over the painting itself.