answersLogoWhite

0


Best Answer

will a 2000 Toyota tundra parts interchange with a 93 Ford ranger xlt with a 3.0 5 speed 4x4

User Avatar

Wiki User

โˆ™ 2013-08-19 02:06:59
This answer is:
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
User Avatar
Study guides
๐Ÿ““
See all Study Guides
โœ๏ธ
Create a Study Guide

Add your answer:

Earn +20 pts
Q: What years do Parts swap for Ford Ranger?
Write your answer...
Submit
Related questions

Is a 97 Ford Ranger compatible with a 2000 Ford Ranger?

Depends on what you are trying to swap. Most parts are some are not.


Can you put a 1994 Ford Ranger engine in a 1991 Ford Ranger?

to answer the question, yes. it can be done you just have to swap your old parts or mod the harness. *flex* i did it


How 2004 Ford Ranger engine swap?

It would help to know what engine you're trying to swap in. Quite a difference between trying to swap in a newer engine of the same model and trying to swap in, say, a Chevy small block.


What is all needed to swap a 2.3l for a 4.0 in a 93 ford ranger?

you need whole harness and dash and a few dollars to add on topso as to to swap a 2.3l for a 4.0 in a 93 ford ranger.


Can you swap out a 93 Ford Mustang 2.3L automatic transmission with a 94 Ford Ranger 2.3L 4cyl 2wd auto tranny?

Yes you can swap them. Is it a direct bolt for bolt swap? Probably not.


Can you use a drivers side door off of a 1983-1987 ford ranger on a 1984 Ford Ranger?

Yes, they should swap out. As long as the cab style is the same, then the 1983-1987 Ford ranger doors will fit a 1984 Ranger.


Will a 1995 ford ranger manual transmission fit in a 1995 with a automatic transmission?

As long as it is the same engine, you also have to swap some other parts out such as the clutch petal.


Can parts swap from a 1968 ford f100 into a 1969 ford f100?

yes


Can you swap an automatic transmission from a 1993 Ford Ranger into a 1990 F150?

for answers go to pinkworld.com


How do you test the air conditioner relay on '97 Ford Ranger?

Swap the relay with another like relay.


Would a 1995 Ford Ranger transmission work in a 1998 Ford Mustang 6 cylinder?

It is possible, but it is most likely not a bolt-for-bolt swap.


Will the seats in a 2004 Ford Ranger fit in a 2001 Ford Ranger?

whats stated below is WRONG... all 97+ will swap fine... head over to www.ranger-forums.com for more answers No they will not. I have been working on rangers for a long time. the only ones that will fit should be 98 to 2001. ford changed mostly everything on these trucks. 2002 and 2003 parts will interchange but that's it.


Can you swap a 4-cylinder engine for a 6-cylinder in a ford ranger?

Not unless you are prepred to swap all mountings, wiring, computer controls, computer and possibly the transmission. There is probably more stuff that I haven't thought of.


Can a 1993 Ford Ranger 4.0 engine and transmission be installed in a 1992 Ranger 4x4?

If they are both auto and 4X4 then the trans will go right in. If they are both 4.0L, it should be a perfect swap. Dan the tranny man


Can you swap a 4.0 ohv 4x4 Ford Ranger engine with a 4.0 ohv two wheel drive engine?

Yes same long block


What late model Ford truck frame will a 1940 Ford truck cab fit on?

Try a Ford Ranger pickup. Any F100 frame will be too wide to fit the tires under the fenders. A common swap is an S10 frame.


How much work would it be to swap a 4-cylinder standard in a ford Ranger with a 302?

It is a little complicated, but if you are a patient person with a little creativity to fab some parts you could accomplish it. There is a guy on Youtube that fit a 6.9L turbo diesel into his four cylinder ranger. Keep in mind that you will also have to swap some parts in the front for the extra weight. The rear axle will probably have to be changed out and there is usually an anti theft chip that needs to be added. I would recommend purchasing a 302 explorer from the junk yard and using it for a donor vehicle and then using your more powerful ranger to haul the rest to the junk yard. Check out www.therangerstation.com for projects that other people have done.


What essential parts can you swap between a 1999 v6 4.0 Ford Explorer and a 1999 v8 5.0 Ford Explorer?

You can find more information about parts swapping on explorerforum.com/forums/showthread.php?t=264374


What is the biggest engine that will fit in a 1999 Ford Ranger?

The ford Ranger has the same engine bay as a Ford Explorer. Those came with a 4.6 liter engine which is basically the same as the 5.4 Triton (same block) so it would slip in the same place. You would need the ECM, trans and all the fun parts ot make it happen though If your looking for a direct swap, the 4.0 was not a slouch. The engine bay should be all set for it save the ECM and tranny.


Whats required to swap a 4.0 for a 3.0 on a 96 ford ranger?

Just time, and a donor truck with the parts. Why in the world would you want to replace the 4.0 with the 3.0 or as some call it the Go Slow V6, gas hog. The 4.0 is a superior engine in almost every respect.


Will 2.0 Ford Escort swap with 2.2?

They won't swap.


Can you swap rear drum brakes to rear rotor brakes on my 2001 Ford Focus?

Yes you can! The Focus SVT model comes with rear disk brakes from the factory and the parts from it will work. There's also a kit from Ford Racing that has all the parts needed to make the conversion. It a fairly straightforward swap and can be done in an afternoon. Look on EBay, they have thousands of part for the Ford Focus, including the disk brake kit.


Will a 2003 ford ranger 4.0 4x4 transmission fit in a 1999 4.0 4x4 ranger?

Yes the trans will fit 4.0 motors but check the electrical plugs on the 03 and make sure they are the same as the 99s if they are!You should be able to swap one to the other


How do you put V8 into a 1988 ford ranger that has a 2.9 V6 right now?

check Advanced Adapters for instruction and adapters necessary to do your swap. I have done several and their adapters help simplify the job.


What V8 engines fit in 1995 ford ranger?

That question has many answers,depending on your mechanical ability and your budget. The most economical solution is a 302 windsor (or a 289 or a 260 but these engines are much harder to find then the 302 (5.0L as Ford liked to called it). ) You can of course swap in a 4.6l v8 engine either the 4v or 2v iterations the 4 valve has its own complications due to the width of the cylinder head, the 4.6l 2v iteration isn't a walk in the park either due to the need to fabricate your own motor mounts and find the right accessory drive. Of course you can swap in a 351 as well all the 302 parts will bolt up to the block but it is generally just bigger so the size of the engine may be a concern. And of course the big blocks will fit in the ranger but only with extensive modifications. By far the most economical swap is the 302(5.0L) swap due to how many applications the 5.0 was used in.