Rear of the drive
rear
No
I'm pretty sure for a PATA you have to set a jumper.
IDE is a type of computer drive (HDD or optical) interface. It is obselete now, all new computers have SATA interface instead.
IDE is a type of computer drive (HDD or optical) interface. It is obselete now, all new computers have SATA interface instead.
The drive interface that uses an 80-conductor ribbon cable is IDE. IDE stands for Integrated Drive Electronics, an interface commonly used to connect hard disks and optical drives to computers.
Yes, if the computer is connected to a network there are options for installing Windows that way.
Traditionally, it has been PATA (IDE), but many newer computers are using SATA DVD drives.
yes adjust the jumper at the back of the drive. it's a white block. it between the interface connector and power connector. you also want to set it aswell in the bios.
An IDE Drive is not the same as a SATA drive, for starters. If you want your optical drive to be the master on an IDE channel you can jumper it to make it such. The second drive on the IDE channel must then be jumpered as a slave. If the optical drive is the only drive on the channel then it ought to be jumpered as the master. Alternatively, you may be able to set both drives to "Cable Select" and let the cable position determine the priority. This presumes that your ribbon cable is of a newer design and supports this option.
A Optical drive is hardware that read and drive a DVD disk or programs.
Yes. But your computer needs to be properly configured for a SATA optical drive. Also, a SATA drive is better than a IDE drive.
It upgrades your hard drive