answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: When should an operator tilt the load back on the mast?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

When stacking a load should the mast be tilted to the vertical?

If your question is in regard to a crane's mast, no.


What are the factors that an operator must be aware of when turning a corner with a forklift?

depends on speed,, but how high your load is being carried, and weight of load being carried.


What is the position of a forklift operator?

Immediately behind the lift mast.


What is forklift mast?

A forklift mast is the column up which the two blades move up and down to lift and lower a load on a pallet.


What is considered a serious situation that could cause the mast to suddenly or slowly lower in a forklift?

A loss of hydraulic fluid can cause a serious situation with the mast. It would cause the mast to lower slowly or suddenly. Also if there is a break in the chain that holds the mast at a certain level, it would cause it to fall suddenly.To reduce the pressure in the fuel line , the forklift operator should


If a sailboat has lee helm should the mast be moved forward or aft?

the mast should not be moved


When the US flag is at half mast should the Papal flag also be at half mast?

The Papal flag should be full staff


What should you look for when launching a sailboat with raised mast?

When launching a sailboat with a raised mast, you should always look for low hanging wires or electric lines that could become entangled in the mast. It is also important to look for structures that may block the mast.


What holds up the mast on a boat?

as far as holding "up" ... the mast is usually stepped (attached) to the deck or keel on a sailboat. this supports the gravity downward load. to keep it from toppling over in the slightest breeze, there are wire rope stays connected at various points. in a masthead sloop there is a headstay and backstay connecting the front and back of the boat to the top of the mast. there are also shrouds (left and right) wire rope rigging (usually) that hold the mast up from the left and right. there can also be attachments at the midheight of the mast for fore and aft shrouds as well.


What should you look out when launching a sailboat with a raised mast?

Look out for a low bridge which your mast might hit.


What should you look out for when launching a sailboat with a raised mast?

Look out for a low bridge which your mast might hit.


What parts are in a forklift?

These are the basic features on a forklift.Mast: The mast is the vertical support that permits raising and lowering the load.Carriage: A support structure where the forks are attached or mounted.Back Rest: Attached to the carriage and prevents the load shifting backwards, it protects the mast cylinders hoses as well as preventing any goods falling through the mast and hitting the operator.Fork (Tynes): The cantilevered arms attached to the load carriage, that engage the load.Lift Cylinder: Controls the amount by which the mast structure, forks and carriage may be raised or lowered in the vertical.Overhead Guard: A framework/roof, providing overhead protection for the operator from falling objects.Tilt Cylinder: Controls the amount by which the mast structure, forks and carriage may be tilted beyond the vertical position, forward or backward.Rating Plate: This is used to inform users of the maximum load a forklift can legally carry.Counter Weight: The weight installed by the manufacturer to give stability to the machine under loadFor more information check out the below link on forklift terminology.