Want this question answered?
This is the coarse adjustment knob. This should be used before the fine adjustment knob (the smaller knob) - which is for fine focusing.
This control allows for precise focusing of the specimen...
The coarse focus adjustment moves the lens (or the stage, depending on the construction of the microscope). So does the fine adjustment but the fine does it much less and much more accurately (less play in the gears)
use the fine adjustment knob to get a better view of what you are looking at.For low power you can use the coarse adjustment and fine adjustmentfor high power you should only use the fine adjustment because on high power, the objective lens is too close to the slide and using the coarse adjustment may scratch the objective lens.
The course adjustment moves the stage of the microscope further/closer away from the objective lens (it is used for general focusing), and the fine adjustment moves the objective lens very small distances for finer focusing.
It is the smallest knob on the microscope.
You use the fine adjustment to focus in HIGH power with a compound microscpe.
The fine adjustment on a microscope is the smaller of the two knobs on the side. It is used after the coarse adjustment, which moves the platform up/down. It is mainly used to focus.
This is the coarse adjustment knob. This should be used before the fine adjustment knob (the smaller knob) - which is for fine focusing.
On a light microscope there is the coarse adjustment knob and the fine adjustment knob
it is used for final focusing.
fine adjustment
to focus on the specimen
it is used as fine adjustment to increase resolution of microscope
After you adjust the coarse adjustment knob, the fine adjustment knob makes it sharper or clearer.
There are two adjustment knobs (coarse and fine) on a microscope so you can move the stage at two different speeds. The coarse moves a lot per revolution, while the fine adjustment knob moves the stage at such small increments that it is nearly impossible to notice when looking from the side. The coarse adjustment knob should be used to get the stage closer to the lens only while you are looking at the microscope from the side. The fine adjustment knob can be used when you are looking into the microscope because there is a much lower chance of running the stage into the lens and breaking it.
fine adjustment knob