Want this question answered?
The flags are testable conditions that are set after many arithmetic or logical instructions to indicate something about the result of the result. For instance, the Z flag means the result is zero, the N flag means it is negative, the O flag means a signed overflow occurred, the C flag means an unsigned overflow occurred, and the P flag means an even number of bits is set in the result. You can use the various flag testable jump instructions, such as JZ or JNZ to test the flag after performing an operation that sets or resets the flag.
It is the "additive identity".
A set of related addition-subtraction or multiplication-division sentences is a fact family.
Not by itself. A mathematical operation has properties in the context of a set over which it is defined. It is possible to have a set over which properties are not valid.Having said that, the set of rational numbers is closed under subtraction, as is the set of real numbers or complex numbers.Multiplication is distributive over subtraction.
yes when you subtract zero from anther number it equals that number example 7-0=7
It is in the logic 1 state. This is usually automatically determined based on the result of the last operation. For example, if the result of a subtraction produces a result of zero, the Z-flag will be set (z=1). If the result was a non-zero value, the Z-flag will be cleared (z=0).
The 8085 microprocessor has 5 flags: 1. Zero flag: The zero flag is set, when the ALU operation results a zero . 2. Carry flag: If an arithmetic operations results in a carry, this flag is set. 3. Parity flag: This flag is set, when an arithmetic or logical operation results in a data, which has even number of 1s. If otherwise, it is reset. 4. Sign flag: After the execution of an arithmetic or logic operations, if D7 bit of the accumulator is 1, it indicates a negative number and this flag is set. If otherwise, it is reset. 5. Auxiliary Carry flag: used for BCD Operations, During the BCD operations, if D3 bit producing the carry then the AC bit set as1, otherwise the bit is 0. 6. Carry Flag: when a carry is generated by digit D7, then the carry flag set as 1, otherwise the bit will be 0.
It depends on your definition of whole numbers. The classic definition of whole numbers is the set of counting numbers and zero. In this case, the set of whole numbers is not closed under subtraction, because 3-6 = -3, and -3 is not a member of this set. However, if you use whole numbers as the set of all integers, then whole numbers would be closed under subtraction.
Carry flag is the the bit 7 of the 8 bit PSW register, whenever there is an addition or subtraction process that has a carry on its 7th bit, the carry flag (C/CY) will be set to 1. OV is set to 1 when there is an arithmetic overflow. this applies to signed and unsigned operations.
No; here's a counterexample to show that the set of irrational numbers is NOT closed under subtraction: pi - pi = 0. pi is an irrational number. If you subtract it from itself, you get zero, which is a rational number. Closure would require that the difference(answer) be an irrational number as well, which it isn't. Therefore the set of irrational numbers is NOT closed under subtraction.
0, zero, is defined as the identity element for addition and subtraction. * * * * * While 0 is certainly the identity element with respect to addition, there is no identity element for subtraction. The identity element of a set, for a given operation, must commute with every element of the set. Since a - 0 ≠ 0 - a, according to group theory, 0 is not an identity with respect to subtraction.
Yes. The set of real numbers is closed under addition, subtraction, multiplication. The set of real numbers without zero is closed under division.
FLAGS REGISTER="h2headingh3"style="color:rgb(0,0,0);"name="flags_register">Flags Register - determines the current state of the processor. They are modified automatically by CPU after mathematical operations and allow one to determine the type of the result as well as determine conditions to transfer control to other parts of the program. Generally you cannot access these registers directly.Carry Flag (CF) - this flag is set to 1 when there is an unsigned overflow. For example when you add bytes 255 + 1 (result is not in range 0...255). When there is no overflow this flag is set to 0.Parity Flag (PF) - this flag is set to 1 when there is even number of one bits in result, and to 0 when there is odd number of one bits.Auxiliary Flag (AF) - set to 1 when there is an unsigned overflow for low nibble (4 bits).Zero Flag (ZF) - set to 1 when result is zero. For non-zero result this flag is set to 0.Sign Flag (SF) - set to 1 when result is negative. When result is positive it is set to 0. (This flag takes the value of the most significant bit.)Trap Flag (TF) - Used for on-chip debugging.Interrupt enable Flag (IF) - when this flag is set to 1 CPU reacts to interrupts from external devices.Direction Flag (DF) - this flag is used by some instructions to process data chains, when this flag is set to 0 - the processing is done forward, when this flag is set to 1 the processing is done backward.Overflow Flag (OF) - set to 1 when there is a signed overflow. For example, when you add bytes 100 + 50 (result is not in range -128...127).
The flags are testable conditions that are set after many arithmetic or logical instructions to indicate something about the result of the result. For instance, the Z flag means the result is zero, the N flag means it is negative, the O flag means a signed overflow occurred, the C flag means an unsigned overflow occurred, and the P flag means an even number of bits is set in the result. You can use the various flag testable jump instructions, such as JZ or JNZ to test the flag after performing an operation that sets or resets the flag.
Yes. In general, the set of rational numbers is closed under addition, subtraction, and multiplication; and the set of rational numbers without zero is closed under division.
Raising the Flag at Ground Zero was created in 2001.
It is the "additive identity".