http://www.fordification.com/index.htm
The diagram of the 1974 Ford F100 transmission shows the location and direction of movement for all gears in the transmission. This diagram is designed to aid with the rebuilding or repair of a transmission.
I got it. It was the brake light switch. No answers need now, thanks.
Wiring diagram for 1972 ford f100 truck w/360 engine automatic trans, AC & Power steering?
google.com google.com
6 degrees BTDC.
Try the Autozone website, I have downloaded almost the entire repair manual
Go down to the local Advance Auto and pick up an ignition switch #S77($13.48) and a ignition lock cylinder #LC14($5.93). With a little work and a whack on the counter the cylinder will go into the switch. (Thanks for helping, Eric!) Back home, use a slot screwdriver and a hammer (there is actually a tool for this I'm sure) to remove the retainer for the ignition from the dashboard. When it comes off the switch is loose. Drop it out from the dash and remove the plug. Plug in the new switch/cylinder setup, slip it into place in the dash and spin the retainer back on. It will probably require the help of another person to hold the switch in order to tighten the retainer down so the switch doesn't spin as you once again use the slot screwdriver and hammer.
The vacuum diagram can be found in a service manual. Your local library may have a copy of the manual that you can check out or copy the diagram from.
a c-6
you should find a sticker in the engine compartment that has this diagram on it, if not you'll need to get a repair manual.
I'm definitely no mechanic but, i have a 1979 ford f100 with the original 302 in it and it doesn't have points.
The switch is located on the steering column right before it exits the cab.