In the oil filler hole in the valve cover. Remove the plug (either twist out or pull out), add oil, and replace.
4.5 quarts with engine oil filter change
ifits a manual its gear oil u add and there should be a plug on tranny to check and add oil if its a auto it goes through dipstick
Remove the oil breather cap on one of the valve covers and pour the oil through the hole in the valve cover.
44 yrs old
Find the oil reading when the car is cool. If the oil is full, add additional oil to the crank case. You can also add a pint of upper cylinder cleaner to the oil. Test drive to see is there are any changes.
Depends if its the single or dual sump oil pan. Dual sumps take approximately 7qts and singles take 5.5qts I believe. I have a swapped 92 5.0 cobra in my 66 and it takes 6qts because of a modified oil pan Start with 5qts, pressure check it, then add if necessary. DON'T OVER FILL IT!
I have a 65 L6 200 with over 500,000 miles on it, I use standard castrol 20/50 with a bottle of STP oil treatment.
about 4 quarts
On a 3.8L 95 mustang the oil filter mounts to the oil pump.
The oil capacitiy of a 2007 V6 Mustang is 5.0 qts
what is the oil capacity of a v6 19998 mustang
Yes they should be if not you would only need to modify it slightly.