You don't say what you are connecting to the battery. If you have a black and white wire the best guess would be white to negative terminal and black to positive terminal. If you were connecting a 6V light bulb it really doesn't matter.
If you have two 6 volt batteries you can take a jumper wire and connect the negative post on one battery to the positive post on the other battery then connect the remaining pos and neg posts to the 12 volt battery charger.
can 6 ,12 volt battery be wire to make in to one 24 volt battery for solar use in home
For the 1998 BMW 318ti, the radio battery constant 12-volt + wire colors are red and white. The 12-volt radio accessory wire colors are purple and white. The ground wire is brown and the antenna trigger wire is white.
You will need two 6 volt batteries to do this. Attach a jumper wire from the negative post on one battery to the positive post on the other. Connect the remaining pos and neg posts to the battery charger.
It depends on what 277 volt device you are trying to connect.
To answer this question fully the type of appliance has to be stated and its voltage.
Take 3 twelve volt batteries Run the + of battery #1 to the - of battery #2. Run the + of battery #2 to the - of battery #3. Use the + of battery #3 for your positive feed, and the - of battery #1 for your ground.
Wire two of the 12 volt batteries in series and the third battery in parallel with the other two. As the two batteries wired in series will give you 24 volts but the amps of only one of the batteries, unless you need the extra amperage of that third battery I would just go with two batteries wired in series. But if you want to use three batteries then connect the positive from one battery to the negative of the other battery. This will give you 24 volts. Now just connect the negative of the third battery to the negative of the first battery connected in series with the second battery. Now connect the positive to the second battery to the positive of the third battery. You will now still have 24 volts but twice the amperage of one of the batteries.
White.
Yes, but know that when connected in series you will increase the voltage but the amps will stay the same as one battery. If you wire them in parallel you increase the amps but the voltage stays the same. Example: Connect two 12 volt batteries in series and you then have 24 volts with the same amperage as one battery. Connect two 12 volt batteries in parallel and you will have 12 volts but the amperage will double.
Change the cord/plug on the stove to a four wire cord/plug. When installing the new plug remove the grounding strip that connects the center lug in the stove wiring block to the frame of the stove. Connect the white wire from the new plug to the center lug. Connect the green wire from the plug to the stove frame.
Connect to the circuit neutral wire which should also be white.